Activity in Technology and Support
Cannot add FTD to FMC after deleting it from FMC
Hi,FTD was added and to FMC and while configuring HA in FMC, deleted FTD from FMC.While trying to add again to same FMC, both primary and secondary FTD not getting registered in FMC.Could you please help on getting the FTD registered with FMC.
9800-40
Hi Is there any document that shows that WLC 9800-40 support wifi-6 and 6G band! I cant find that document
Secure Client ISE 3.2 Posture failure
I have just started using Secure Client Posture on my windows workstations. All but 2 work fine. The two are using the IP of the ISE instead of the FQDN. All systems have the same ISEPostureCFG.xml files on them. If I disable the network connectio...
Cisco Secure Client XML overwrite issue
Hello, any help appreciated.I am having issues when trying to assign a different group policy to a user where the group policy contains a different client profile (XML) to the one used to connect in the first instance. This is what I am trying to do....
Router Modem and CRC Relationship
Hi,We are finding that some router models are more susceptible to CRC increase/snr decrease than others and tend to lose sync more easily especially when it comes down to sudden spikes in crc indicative of REIN/SHINE issues. Im trying to determine wh...
OpenSSH < 9.6 Multiple Vulnerabilities in CISCO C9500-16X-A
We received vulnerability mail from my security team. Could you anyone have solution for this vulnerability CVE-2023-51384 , CVE-2023-48795 , CVE-2023-51385
Cisco Firepower Access remote site-to-site subnet via Cisco Anyconnect
When a client connect to the HQ via AnyConnect vpn, they can access the HQ local subnet, but can´t access the subnet at the remote office, that has an site-to-site connection to the HQ.Can this be configuret via the Cisco Firepower gui?Cisco Firepowe...
Control Hub version and any integration documents
We have to build an autonomous administrator using the Control Hub API. Can you provide the version of Control Hub API and any integration documents ?
permit ip ifc outside any any
We have FMC and FTD , In FMC we configured Blocked traffic ACCESS POLICY , but while checking in FTD(CLI) one more ACL( Ifc Outside any any allow) showing with same rule-id 26844160. any ideas how to find this ACL in FMCACL in FTD ========access-li...
What is the minimum port configuration necessary to profile host?
Hello,If I simply want to profile network hosts without subjecting them to dot1x, what is the minimum port configuration necessary to accomplish this?
Warranty headache
I have a piece of equipment that support acknowledges to be covered under warranty, but they are refusing to help, as it is allegedly not associated with my CCO ID (even though I deliberately registered it and see it listed). Does anybody have any su...
new user on Cisco Firepower 1120 unable to https
Team,We have a new Cisco Firepower 1120 just configured with basic configuration.After the admin user I added another user with the "configure user add" command.This new user can SSH to the device but cannot SSL.Further, I want to ensure that this ne...
DMVPN issue with 800 series routers
I have a DMVPN network with 4331 hub routers. Our HQ in Memphis has a hub on AT&T, and another on Lumen. Our New York hub is also a Lumen connection. All are 500Mb up/down. We have about 35 spokes around the US that peer to all 3 routers. BGP is the ...
RADIUS server and 802.1x on switch Cisco Packet Tracer
Good afternoon, Cisco community. I faced a problem when configuring RADIUS server using switch as authenticator. When using router everything was not complicated and worked, example below.But my supervisor said that it is wrong to do it this way and ...
Recommendation Software ISE
Hi EveryoneOur client for ISE software still uses version 2.6 with pach 10,We will upgrade the software to 3.1 with patch 8, please provide a recommendation link from CiscoI'm afraid that if I downloaded it wrong it would have fatal consequencesThank...
| User | Helpful Count |
|---|---|
| 98 | |
| 78 | |
| 72 | |
| 61 | |
| 59 |
