Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- Technology and Support
- Collaboration
- Contact Center
- Re: Outbound Dialer Port C=10 R=0
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
3043
Views
5
Helpful
16
Replies
Outbound Dialer Port C=10 R=0
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-28-2008 01:18 AM - edited 03-14-2019 02:47 AM
Hi,
I have an issue with my Outbound Dialer Ports. On the Dialer Window Title it's showing C=10 R=0 B=0.
I've checked in the Call Manager and the Dialer Ports (VIP 30 Device) are shown as registered.
One thing though, the Dialer is configured to connect to a TFTP Server which is different than where the Dialer ports are registered to.
Ex:
CM Pub 192.168.1.1
CM Sub 192.168.1.2
CM TFTP 192.168.1.3
Dialer TFTP Server = 192.168.1.3
Dialer Ports are assigned to Device Pool in Subcriber 192.168.1.2
I have tried the DialogicTest app on the Dialer and were able to call out using the ports.
The ports have been associated with PG_User.
However, I suspect that this issue is related to jtapi communication between the Dialer and CM.
does anybody have any suggestion?
Regards
Erwin
Labels:
- Labels:
-
Other Contact Center
16 Replies 16
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-20-2019 10:24 PM
Good Time Day.
Sorry for not answering for so long. I was on vacation.
When prompted Select * from Dialer 0 rows to HDS DB
When prompted Select * from Dialer 3 rows to AWDB
This is normal ?
Test Dialogictest screen
C:\icm\bin>dialogictest softphone 1 ccm01 5011 1
Softphone type selected
error: too few parameters
usage: DialogicTest <softphone/dialogic> <callmanager name> <Dialer ICM ID>
C:\icm\bin>
softphone
<number of ports in the Dialer port map><CallManager name or IP address> <dialer ID> <starting channelID> <custname>
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-09-2019 10:09 PM
Good Time Day.
Sorry for not answering for so long. I was on vacation.
When prompted Select * from Dialer 0 rows to HDS DB
When prompted Select * from Dialer 3 rows to AWDB
This is normal ?
Test Dialogictest screen
C:\icm\bin>dialogictest softphone 1 ccm01 5011 1
Softphone type selected
error: too few parameters
usage: DialogicTest <softphone/dialogic> <callmanager name> <Dialer ICM ID>
C:\icm\bin>
softphone
<number of ports in the Dialer port map><CallManager name or IP address> <dialer ID> <starting channelID> <custname>
reset Dialer
.
07:58:45:541 dialer-baDialer Trace: (SP) port: 004 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 004, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 003 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 003, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 002 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 002, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 001 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 001, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.
07:58:45:571 dialer-baDialer Trace: (DD) **** Configured SoftPhone Channels: [4], Initialized: [0] ****.
07:58:45:571 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:571 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:572 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:572 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:593 dialer-baDialer Trace: (SP) port: 004 Received Station Register Ack Msg, keepInt=30.
07:58:45:593 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:593 dialer-baDialer Trace: (SP) port: 004 Capabilities request message received.
07:58:45:593 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:601 dialer-baDialer Trace: (SP) port: 004 Received Station Version Msg, version: 1954683924.
07:58:45:601 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:603 dialer-baDialer Trace: (SP) port: 003 Received Station Register Ack Msg, keepInt=30.
07:58:45:603 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:603 dialer-baDialer Trace: (SP) port: 003 Capabilities request message received.
07:58:45:603 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:607 dialer-baDialer Trace: (SP) port: 003 Received Station Version Msg, version: 1954683924.
07:58:45:607 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:607 dialer-baDialer Trace: (SP) port: 002 Received Station Register Ack Msg, keepInt=30.
07:58:45:607 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:609 dialer-baDialer Trace: (SP) port: 002 Capabilities request message received.
07:58:45:609 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:609 dialer-baDialer Trace: (SP) port: 002 Received Station Version Msg, version: 1954683924.
07:58:45:609 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:609 dialer-baDialer Trace: (SP) port: 001 Received Station Register Ack Msg, keepInt=30.
07:58:45:609 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:611 dialer-baDialer Trace: (SP) port: 001 Capabilities request message received.
07:58:45:611 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:613 dialer-baDialer Trace: (SP) port: 001 Received Station Version Msg, version: 1954683924.
07:58:45:613 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:642 dialer-baDialer Trace: (SP) port: 004 Received Station Button Template Msg.
07:58:45:642 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:644 dialer-baDialer Trace: (SP) port: 004 LineStat Message received : 6163.
07:58:45:644 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:644 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:644 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:646 dialer-baDialer Trace: (SP) port: 003 Received Station Button Template Msg.
07:58:45:646 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:648 dialer-baDialer Trace: (SP) port: 003 LineStat Message received : 6162.
07:58:45:648 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:648 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:648 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:652 dialer-baDialer Trace: (SP) port: 002 Received Station Button Template Msg.
07:58:45:652 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:654 dialer-baDialer Trace: (SP) port: 002 LineStat Message received : 6161.
07:58:45:654 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:654 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:654 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:654 dialer-baDialer Trace: (SP) port: 001 Received Station Button Template Msg.
07:58:45:654 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:656 dialer-baDialer Trace: (SP) port: 001 LineStat Message received : 6160.
07:58:45:656 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:656 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:656 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 000, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 004, station: 6163.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 000, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 003, station: 6162.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 000, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 002, station: 6161.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 001, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 001, station: 6160.
07:58:45:658 dialer-baDialer Trace: Registration Complete for Dialer Ports: [4] ports.
07:58:45:658 dialer-baDialer Trace: (SP) Dial tone detection always enabled in IPCC.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 002, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 004, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 001, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 003, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:46:571 dialer-baDialer Trace: (PMC) PortMap Self-Check Initialized; [4] ports configured.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 3, port: 002, instrument: [6161].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 002, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 4, port: 004, instrument: [6163].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 004, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 5, port: 001, instrument: [6160].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 001, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 6, port: 003, instrument: [6162].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 003, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (FAILOVER) SENT:HeartBeatRequest to CTI Server; InvokeId[7].
07:58:47:573 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 002, id: 1000000003, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:573 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 002, invoke: 3.
07:58:47:575 dialer-baDialer Trace: (FAILOVER) Received:HeartBeatConf from CTI Server; InvokeId[7].
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 004, id: 1000000004, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 004, invoke: 4.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 001, id: 1000000005, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 001, invoke: 5.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 003, id: 1000000006, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 003, invoke: 6.
07:58:53:567 dialer-baDialer Trace: (FAILOVER) SENT:HeartBeatRequest to CTI Server; InvokeId[8].
07:58:53:569 dialer-baDialer Trace: (FAILOVER) Received:HeartBeatConf from CTI Server; InvokeId[8]
Sorry for not answering for so long. I was on vacation.
When prompted Select * from Dialer 0 rows to HDS DB
When prompted Select * from Dialer 3 rows to AWDB
This is normal ?
Test Dialogictest screen
C:\icm\bin>dialogictest softphone 1 ccm01 5011 1
Softphone type selected
error: too few parameters
usage: DialogicTest <softphone/dialogic> <callmanager name> <Dialer ICM ID>
C:\icm\bin>
softphone
<number of ports in the Dialer port map><CallManager name or IP address> <dialer ID> <starting channelID> <custname>
reset Dialer
.
07:58:45:541 dialer-baDialer Trace: (SP) port: 004 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 004, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 003 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 003, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 002 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 002, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 001 successfully connected to Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (SP) port: 001, Connected to Primary Call Manager [10.0.245.2].
07:58:45:571 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.
07:58:45:571 dialer-baDialer Trace: (DD) **** Configured SoftPhone Channels: [4], Initialized: [0] ****.
07:58:45:571 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:571 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:572 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:572 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_UNKNOWN to SP_STATE_REGISTER.
07:58:45:593 dialer-baDialer Trace: (SP) port: 004 Received Station Register Ack Msg, keepInt=30.
07:58:45:593 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:593 dialer-baDialer Trace: (SP) port: 004 Capabilities request message received.
07:58:45:593 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:601 dialer-baDialer Trace: (SP) port: 004 Received Station Version Msg, version: 1954683924.
07:58:45:601 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:603 dialer-baDialer Trace: (SP) port: 003 Received Station Register Ack Msg, keepInt=30.
07:58:45:603 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:603 dialer-baDialer Trace: (SP) port: 003 Capabilities request message received.
07:58:45:603 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:607 dialer-baDialer Trace: (SP) port: 003 Received Station Version Msg, version: 1954683924.
07:58:45:607 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:607 dialer-baDialer Trace: (SP) port: 002 Received Station Register Ack Msg, keepInt=30.
07:58:45:607 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:609 dialer-baDialer Trace: (SP) port: 002 Capabilities request message received.
07:58:45:609 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:609 dialer-baDialer Trace: (SP) port: 002 Received Station Version Msg, version: 1954683924.
07:58:45:609 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:609 dialer-baDialer Trace: (SP) port: 001 Received Station Register Ack Msg, keepInt=30.
07:58:45:609 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_REGISTER to SP_STATE_VERSIONING.
07:58:45:611 dialer-baDialer Trace: (SP) port: 001 Capabilities request message received.
07:58:45:611 dialer-baDialer Trace: Sent StationCapabilitesResMsg.
07:58:45:613 dialer-baDialer Trace: (SP) port: 001 Received Station Version Msg, version: 1954683924.
07:58:45:613 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_VERSIONING to SP_STATE_BUTTON_TEMPLATE.
07:58:45:642 dialer-baDialer Trace: (SP) port: 004 Received Station Button Template Msg.
07:58:45:642 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:644 dialer-baDialer Trace: (SP) port: 004 LineStat Message received : 6163.
07:58:45:644 dialer-baDialer Trace: (SP) Port: 004 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:644 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:644 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:646 dialer-baDialer Trace: (SP) port: 003 Received Station Button Template Msg.
07:58:45:646 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:648 dialer-baDialer Trace: (SP) port: 003 LineStat Message received : 6162.
07:58:45:648 dialer-baDialer Trace: (SP) Port: 003 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:648 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:648 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:652 dialer-baDialer Trace: (SP) port: 002 Received Station Button Template Msg.
07:58:45:652 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:654 dialer-baDialer Trace: (SP) port: 002 LineStat Message received : 6161.
07:58:45:654 dialer-baDialer Trace: (SP) Port: 002 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:654 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:654 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:654 dialer-baDialer Trace: (SP) port: 001 Received Station Button Template Msg.
07:58:45:654 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_BUTTON_TEMPLATE to SP_STATE_LINESTATE.
07:58:45:656 dialer-baDialer Trace: (SP) port: 001 LineStat Message received : 6160.
07:58:45:656 dialer-baDialer Trace: (SP) Port: 001 Changing state from SP_STATE_LINESTATE to SP_STATE_READY.
07:58:45:656 dialer-baDialer Trace: (SP) Line: 1: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:656 dialer-baDialer Trace: (SP) Line: 2: Changing state from SP_LINESTATE_UNKNOWN to SP_LINESTATE_IDLE.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 000, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 004, station: 6163.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 000, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 003, station: 6162.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 000, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 002, station: 6161.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 001, state: IDLE.
07:58:45:658 dialer-baDialer Trace: (PM) Init port: 001, station: 6160.
07:58:45:658 dialer-baDialer Trace: Registration Complete for Dialer Ports: [4] ports.
07:58:45:658 dialer-baDialer Trace: (SP) Dial tone detection always enabled in IPCC.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 002, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 004, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 001, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:45:658 dialer-baDialer Trace: (CPORT) SetState, port: 003, state: PORT_SEND_QUERY_DEVICE_REQ.
07:58:46:571 dialer-baDialer Trace: (PMC) PortMap Self-Check Initialized; [4] ports configured.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 3, port: 002, instrument: [6161].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 002, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 4, port: 004, instrument: [6163].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 004, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 5, port: 001, instrument: [6160].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 001, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (CLMGR) CTI Query Device Information Request, invoke: 6, port: 003, instrument: [6162].
07:58:47:571 dialer-baDialer Trace: (CPORT) SetState, port: 003, state: PORT_WAIT_FOR_QUERY_DEVICE.
07:58:47:571 dialer-baDialer Trace: (FAILOVER) SENT:HeartBeatRequest to CTI Server; InvokeId[7].
07:58:47:573 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 002, id: 1000000003, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:573 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 002, invoke: 3.
07:58:47:575 dialer-baDialer Trace: (FAILOVER) Received:HeartBeatConf from CTI Server; InvokeId[7].
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 004, id: 1000000004, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 004, invoke: 4.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 001, id: 1000000005, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 001, invoke: 5.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Control failure event, port: 003, id: 1000000006, failure code: 34 [CF_RESOURCE_OUT_OF_SERVICE], peripheral error code: 11006.
07:58:47:576 dialer-baDialer Trace: (CLMGR_IP) Query Device Info Request Failure Conf, port: 003, invoke: 6.
07:58:53:567 dialer-baDialer Trace: (FAILOVER) SENT:HeartBeatRequest to CTI Server; InvokeId[8].
07:58:53:569 dialer-baDialer Trace: (FAILOVER) Received:HeartBeatConf from CTI Server; InvokeId[8]
- « Previous
-
- 1
- 2
- Next »
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Customers Also Viewed These Support Documents