I am having an issue creating a port group on nexus 1000v.
I create the port profile on the vsm using the following config...
port-profile type vethernet v506-openGI
vmware port-group
switchport mode access
switchport access vlan 506
no shutdown
state enabled
vsm1# show port-profile name v506-openGI
port-profile v506-openGI
type: Vethernet
description:
status: enabled
max-ports: 32
min-ports: 1
inherit:
config attributes:
switchport mode access
switchport access vlan 506
no shutdown
evaluated config attributes:
switchport mode access
switchport access vlan 506
no shutdown
assigned interfaces:
Vethernet49
Vethernet56
port-group: v506-openGI
system vlans: none
capability l3control: no
capability iscsi-multipath: no
capability vxlan: no
capability l3-vn-service: no
port-profile role: none
port-binding: static
The port group is then learned by vmware & i add the vNIC's from 2 x VM's to the group OK.
however, i cannot then ping the default gateway & neither of the 2 vm's can ping each other?
Has anyone experienced this issue before?
thanks
Colin