Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All, I have 25 SIP phones 3905 with the latest firmware "CP3905.9-4-1SR1-3.loads", the problem is when make external call the Volume is so low...But for the internal call the volume is OK.. Any one can help me ??? please Best Regards,Ahmad Kefaya
I am trying to interface an IP phone with autodialing capabilities (a Viking E-30-IP) either to a VoIP provider or POTS line. The IP phone is some distance from the main LAN and I will connect it using Nanostation M2 transceivers (which will also car...
Hello, I have a couple of users that are not working when trying to dial by name, I.e James Blair. The system asks for the name of the person you are trying to reach, it works for Linda Lee just fine. Does anyone know where the name is pulled from? ...
Hello,Below is the BOQ for voice router,presales ordered 2 no's of CME router and 9'nos of routers with 25 seats SRST license, How i wll sortout them physically by which command i will come to know that this 2 no's are for CME purpose and the others...
We are a very large organization with offices in virtually every area code. With this in mind, and because we are migrating from a group of old PBXs to a single, all-encompassing CUCM system, we decided that our dial plan would be 10 digits and that...
I'd like to install CUCM in my lab, test it, then put it into production. During my install I want to use my actual IP addresses, to include DNS settings. My DNS server is not accessible from my lab. CM does a DNS check during the install, but giv...
Hi all,We have CUCM 9.1 versionWhen I check my extension on CDR reports, there is no records for outbound calls related with my extensionBut then I realized that, My DID number is written to calling number field, instead of my extension.Which service...
Hello everyoneI would really appreciate any clarity on a licensing question for the VG350 analog gatewayWe are purchasing a VG350 to integrate into an BE 6000 version 8.6 environment. I have over 800 DLU's available and we have tested adding a VG240 ...
Hi Folks,I'm new to the Cisco CME; i've gotten the config up to the point where I can terminate calls to my CME via the DID number; and the IP phone rings and I can answer and get talk path.My basic setup: i have two IP Phones setup on my CME: IP Pho...
Hi, I am facing problem in inbound calls in H.323 gateway with FXO ports. Outbound calls are working perfect but inbound calls doesnt land anywhere and keeps ringing. Both connection plar to CTI RP or connection plar to one extension doesnt work. I d...
Hi Team,How to configure the auto attendant IVR welcome greetings in CUE 8.6 with CUCM 8.X. Please share the Autoattendant call handler greeting exmaple configuration.1)Cisco Unity Express 8.6 (ISM-SRE module on cisco 2900 R)2) Cisco call manager 8....
Hey guys.. our Telephony group is looking at deploying DX series phones through out but as a security person am concerned about Android in the environment though it's an SE version. Has anybody ran av/am on these phones?What about managing with an M...
Hi Team, a customer is asking to change the user call privilege for Cisco Jabber Extension based on the location to have Mobile calls privileges if they are covered by local Access Point and Internal calls privilege if they are registered from Intern...
I created a Hunt Pilot, that will call a line group. In that line group are about 10 extensions on 10 different phones. When you call that hunt pilot, it should broadcast to all 10 phones. All 10 Phones with those extension in the Line Group are se...
Our environment: PSTN T1 -> CUBE -> SIP Trunk -> CUCM 10.5We have a DID that we've moved to a hosted fax solution. We will not be porting the number directly to the provider, we want to retain the number.So calls will come in to us, but then we need...
