Wireless

Hello,I have two SSIDs on an Autonomous Access Point, that goes to a 2960 switch, that connects to a L3 3560. I have a vlan for admin/private internal access that uses the native vlan (1) and guest vlan (50). I have configured both and I am trying to...

Is there a command for CLI to check just the clients and what wlan they are associated to? I have used the show wlan summery and the show client summery but neither show what wlan the clients are on. Ver 5.1.151.0

Hi There          I am thinking the way how to make the guest ID job easier. From the NAC document i didn't see whether it possible to schedule create bulk guest account everyday and will send through the email to lobby ambassdor, is this function av...

Hi guys a very easy question:what is better? or if exist another best-practices please tell me.consider the fact only 1 ssid, 2000 user on same building  (4 areas, not separete areas, they are very close)1.- one network mask /21? for whole building?....

Hi All, I am facing a problem in a newly deployed branch site where the Clients are not receiving DHCP IP address from a centrally switched Guest SSID. I see the client status is associated but the policy manager state is in DHCP_REQD.The dhcp pool i...

Hi There         Recently i am trying to integrate the google earth into CISCO NCS, but the issue is there are white overlays when i turn on the heatmap         Appreciate if anyone could give a post.BR/Jun

Hi everone. I have made a new installation with CUCMBE, a WLC CT5508, AP1262N x 70 and 7921 x 100. The firmware of the phone is 1.4SE1We use a SSID only for voice and the APs are maninly used for voice. The currently configuration in de WLC have ever...

dear friends,i have a existing wireless network setup in my officeexisting wlc in 4402 and LAPs are 1130 & 1242 all are working finebut we are now planning to use new 5500 series controllers for the same access points,i want to ask that how i can don...

Hi ;           I am trying to implement PEAP authentication with ACS 5.3. I have two SSID's with peap authentication and i have two groups in AD. I need to map one ssid with one group and another SSID with the other group.Can any one tell me how to p...

Hi to all i have to convert lightweight AP to autonomous, someone know how I can do this operationb?

I have two different wlc's that are located in different locations and WAN sites.  I want them to use the same DNS for both sites since there is no need to add a specific server in the small areas.  When adding a DNS entry for "cisco-capwap-controlle...