cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1290
Views
0
Helpful
3
Replies

I can´t access with browser to my access point

juanfalomir
Level 1
Level 1

can not access my wireless access point for my browser AP1242AG
by dhcp access point receives an ip and replies with a ping but I can not access the browser IE7


any idea thanks

3 Replies 3

Surendra BG
Cisco Employee
Cisco Employee

Hi,

make sure you have enabled HTTP on the AP..what does the console logs say?? is the AP is autonomous or LWAPP mode?? are we able to enter the commands on the AP ??

en

conf t

Whats the model number of the AP that we are using??

Regards

Surendra

Regards
Surendra BG

Hi Surendra,

that what appears on the console, what I can do to know that I have enabled http?

             Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELE

ASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Mon 02-Nov-09 18:40 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

Initializing flashfs...

flashfs[1]: 5 files, 2 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 15998976

flashfs[1]: Bytes used: 2625536

flashfs[1]: Bytes available: 13373440

flashfs[1]: flashfs fsck took 4 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-LAP1242AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/81

92K bytes of memory.

Processor board ID FCZ144881QU

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

LWAPP image version 3.0.51.0

1 FastEthernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: C4:71:FE:B3:8C:EC

Part Number                          : 73-10256-07

PCA Assembly Number                  : 800-26918-06

PCA Revision Number                  : A0

PCB Serial Number                    : FOC14451D0E

Top Assembly Part Number             : 800-29152-03

Top Assembly Serial Number           : FCZ144881QU

Top Revision Number                  : A0

Product/Model Number                 : AIR-LAP1242AG-E-K9

% Please define a domain-name first.

Press RETURN to get started!

*Mar  1 00:00:05.384: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log file fla

sh:/event.log

*Mar  1 00:00:05.385: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log

(contains, 0 messages)

*Mar  1 00:00:07.436: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to

up

*Mar  1 00:00:07.461: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELE

ASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Mon 02-Nov-09 18:40 by prod_rel_team

*Mar  1 00:00:07.488: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Mar  1 00:00:07.992: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power s

ource

*Mar  1 00:00:08.436: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern

et0, changed state to down

*Mar  1 00:00:36.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:00:46.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:00:56.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:01:06.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:01:16.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:01:26.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:01:36.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:01:46.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:01:56.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:02:06.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:02:16.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:02:26.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:02:36.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:02:46.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

*Mar  1 00:02:47.222: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern

et0, changed state to up

*Mar  1 00:02:55.841: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:03:05.718: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:03:06.721: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:03:06.724: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

*Mar  1 00:05:16.724: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP

. Renewing DHCP IP.

Not in Bound state.

*Mar  1 00:05:25.358: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:05:32.232: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:05:33.235: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:05:33.237: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

*Mar  1 00:07:33.237: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP

. Renewing DHCP IP.

Not in Bound state.

*Mar  1 00:07:41.866: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:07:48.740: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:07:49.743: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:07:49.745: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

*Mar  1 00:09:49.745: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP

. Renewing DHCP IP.

Not in Bound state.

*Mar  1 00:09:58.373: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:10:05.248: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:10:06.250: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:10:06.252: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

*Mar  1 00:12:06.253: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP

. Renewing DHCP IP.

Not in Bound state.

*Mar  1 00:12:14.882: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:12:21.756: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:12:22.759: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:12:22.761: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

*Mar  1 00:14:22.761: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP

. Renewing DHCP IP.

Not in Bound state.

*Mar  1 00:14:31.389: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:14:38.264: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:14:39.266: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:14:39.269: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

*Mar  1 00:16:39.270: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP

. Renewing DHCP IP.

Not in Bound state.

*Mar  1 00:16:47.899: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:16:55.773: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:16:56.774: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:16:56.776: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

*Mar  1 00:18:56.777: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP

. Renewing DHCP IP.

Not in Bound state.

*Mar  1 00:19:05.405: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D

HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec

Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21

2)

Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212

)

*Mar  1 00:19:13.279: %CAPWAP-3-ERRORLOG: Did not get log server settings from D

HCP.

*Mar  1 00:19:14.282: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL

LER.itaca-sa.com

*Mar  1 00:19:14.284: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL

ER.itaca-sa.com

thanks,

Hi,

The AP is in LWAPP mode and you neeed to convert the same to Autonomous.. so that we can access the GUI..

here is the doc that i hv written and which will help you to get the issue resolved..

https://supportforums.cisco.com/docs/DOC-14960

Lemme know how this works out for you!!

Regards

Surendra

===

Please dont forget to rate the usefull posts

Regards
Surendra BG
Review Cisco Networking for a $25 gift card