Failed to modify webapp state on acs5.2

[steven yang]

hi guys,

     when i try to enable acs migration web interface,i got the error message as below,anybody would be help on it,thanks in advance!

acs52/admin# acs config-web-interface migration enable
Failed to modify webapp state

pasted the logging as below:

Mar  8 17:22:21 acs52 [ACS-modify-migration-state]: migration
Mar  8 17:22:21 acs52 [ACS-modify-migration-state]: log4j:WARN No appenders could be found for logger (org.hibernate.cfg.Envi
ronment).
Mar  8 17:22:21 acs52 [ACS-modify-migration-state]: log4j:WARN Please initialize the log4j system properly.
Mar  8 17:22:29 acs52 [ACS-modify-migration-state]: INFO:Creating client socket at:172.22.254.199:2030
Mar  8 17:22:29 acs52 [ACS-modify-migration-state]: INFO:Creating client socket at:172.22.254.199:2030
Mar  8 17:22:30 acs52 [ACS-modify-migration-state]: INFO:Creating client socket at:172.22.254.199:2030
Mar  8 17:22:30 acs52 admin: [ACS-modify-migration-state] failed

[kgiusti]

I had the same errors, once rebooting I was able to enable the migration interface.

wan-radius-pri/kgiusti# acs config-web-interface migration enable

wan-radius-pri/kgiusti# show acs-config-web-interface

migration interface is enabled

ucp interface is enabled

view interface is enabled

[Jatin Katyal]

Could you please restart all the services.

If that doesn't work then you may need to reload with a command

reload

In case issue persist even after reload, please share the

Model: vmware / appliance

Specification of vmware

We might need to look into ADE.logs and mgmt.logs before we reimage the box.

~BR
Jatin Katyal

**Do rate helpful posts**

[Jatin Katyal]

Did you get a chance to try the suggested steps in this thread?

~BR
Jatin Katyal

**Do rate helpful posts**