Network Security

First off, thank any and all for any help given. It is truly appreciated.I'm setting up a DMZ on our PIX 515E for our E-Mail Server. There is a great article about doing this titled "Configuring the PIX Firewall with Mail Server Access on DMZ Network...

What's the best way for me to monitor the traffic going through a pix? I'd like to know who's going where, what size downloads are, etc..Thanks for the help.

Can policy based routing be done on the PIX firewall?

I have set up a PIX 515E on our network to replace our previous firewall/router. After getting everything configured I seemed to have run into an issue (I'm sure it is very simple, but I am new to Cisco products). My webserver as well as mailserver a...

I have started to setup an environment for two Pix 525's that will be performing failover. I haven't done this before so I think I might need some help. Both pixes are exactly the same software excecpt one has a 3des license and the other does.Anyho...

We have a PIX 506e that had been working well, thenwe started having problems with NAT users gettingflaky (inconsistent) connections going out. Yesterday all NAT traffic stopped. From what I cansee I am not passing any traffic.I can ping addresses ...

Hi, Can anyone tell me that is it i can use the internal computer to ping the firewall's outside interface?Thank you.

Wondering if you guys can shed some light on thisI have a host (AM1/172.16.25.3) that resides behind PIX A-interface inside 172.16.x.x security 100Then i have another host (AM2 /172.16.26.30) that resides behind PIX BPIX A is Connected to PIX B via i...

I have a PIX-525-UR, PIX OS 6.2(2) with several interfaces.Having problem to get one IP on a DMZ to be able to use to different NAT rules, one to a DMZ with a lower security and another one to the outside.like this:nameif ethernet0 outside security0n...

I'm trying to duplicate a PIX config from an existing unit to a second unit. This is my first experience in setting up a PIX from scratch so i may have missed a step somewhere? I'm trying to add in an object-group but am getting an error from the p...

I am planning a migration from a Checkpoint Firewall box to a PIX firewall. Has anyone seen a tool or worked up a procedure for translating a Checkpoint rule set into something a PIX or human can understand?Thanks.

I am running a few PIX 501 using Network Extension Mode (NEM) connecting to a Cisco 3000 Concentrator.I am having trouble setting up a pix in NEM to accept ssh connections for remote management.I have several pixes setup using a non-nem config and I ...

I'm trying to set my 535 to syncronize time with a public ntp server but I can't seem to get it to work.Would someone mind outlining the exact steps I'd need to perform to sync the Pix's time with a public ntp server?Thanks,Mike J.

Hi Guys,I am going to execute a project involving deploying of Cisco IDS 4215 and PIX 515E at primary and disaster recovery site one each . The primary site is connected to DR site with lease line to be connected by 2691 and 1700 routers. Similarly ...