Has this happened to anyone? I had setup the radkit service to auto start and that didn't work either. After the linux host crashed/rebooted the radkit inventory was gone and it looks like it bootstrapped with a new serial number. How do I determine...
Hi! Is there a way to filter OSPF routes without the "Area" command?I could swear I've done it before, but I can't seem to replicate it again.I am in CML, and my topology is R1--R2--R3.Link between R1 to R2 is area 0, R2 to R3 area 1.From what I reca...
I had observed this issue when I attempted the following sequence:terminal pager 0more system:running-configI received the error message, %Error reading system:run (Configuration line too long)Does anyone know if the error message is looking at a sin...
Have this alert for a C9200L-48P-4X without any power supply inserted actaully in port A. 8 08:30:47.439: %PLATFORM_FEP-1-FRU_PS_INCOMPATIBLE: Switch 1: power supplySW PID Status Sys Pwr PoE Pwr Watts-- ------------------ ---------- --------------- ...
Hello Iam facing a issue with HTTPS Management access on a firepower 2110. I assigner chassis mgmt ip address and set ip=block on the interface . I am able to ping the chassis mgmt interface from laptop and other machines. I can access the SSH in mgm...
There really needs to be an option in RBAC to enable or disable command runner. It shouldn't be tied to viewing inventory. The issue with how it is now, you can't disable the "show run" command in command runner. But, you can disable access to the de...
Am a learner currently studying fundementals of cybersecurity and am unable to proceed with using the CSE-LABVM Virtual Machine because it prompts me to enter a password which i dont know. please advice. attached below is a screenshot of the problem
Internal Error: No such file or directory (2): could not open file /opt/cisco/platform/logs/sysmgr/sam_logs/ucssh_logs/ucssh_52868.logCisco Firepower Extensible Operating System (FX-OS) Softwarerecieving this error message and can't access FXO's MGMT...
Customer would like to show us how it passed through the ESA "Just to show you, please see attached email which passed through our ESA. I made a few notes below, please use this as an example in pushing for a solution on the ESA. I think the screensh...
Do we have any progess on this bug? This is affecting our 12K users and we dont have workaround. we also tried the revert but it seems taht the configuration file exported before the rollback is corrupted, so, we are stucked.many thaks,Jacir
While doing Networking Basics for CCST Cybersecurity i have encountered a Problem/Bug with the final quiz 11.3.3 for module 11 in beforementioned Networking Basics.The question is as follows: "Which message does an IPv4 host reply when it receives a ...
While working on Networks Basics for CCST Cybersecurity, I have come across a problem.I was doing the 10.2.6 Activity-IPv6 Address Representation, converting the IPv6 addresses into their compressed form.After converting this address; 2001:0000:0db8:...
Hey guys! I'm new to setting up IoT devices with VLAN . I've been trying to add IoT devices on my server but it does not let me, I also tried making a new account for the IoT devices but it still does not work. I also used VLANs and DHCP for this sin...