We have 12 new C220-M6. Eight were placed into UCSM controlled domains. Four were placed into an IMM domain.The eight placed into UCSM controlled domains showed up as expected with the correct inventory, specifically the fiber channel adapters. The f...
Forum Posts
hello any idea how top add PXE boot into this policy? not sure what Slot and Interface name mean --- - name: "Boot Order Policy for FC" vars: api_info: &api_info_fc api_private_key: "{{ api_private_key }}" api_key_id: "{{ api_key_i...
I deleted my domain and chassis profiles but i cannot delete some policies and says the policy is still in use by the profiles. any idea?
Is vPC supported on the 6536 FIs? It seems to work fine with 6248s but with IMM and new 6536 FIs i can only get the A side to come up. The B comes online for a few seconds and then fails. The port channel is only configured on 1 port out of each FI...
any idea how to leave native vlan blank. When i dont put in native vlan in this playbook, it defaults to vlan1 and not blank --- - name: "Configure Ethernet Network Group Policy" vars: api_info: &api_info_mgmt api_private_key: "{{ api_pr...
Back story:I am upgrading/replacing our existing UCS environment which us UCSM Managed, Cisco b200m5s and some older m4s. Cisco 6248 FIs. FC storage connected to 9108 MDS switches. The new environment will be greenfield and be IIM with 6536 FIs and...
Resolved! lost password to UCS-FI-6454 (IMM)
Hi,We lost the 'admin' password for our pair of UCS-FI-6454 Is there a way to reset it somehow please ?[and is there a way meanwhile to access their CLI via InterSight ?] Thanks in advance !
i am trying to create multiple san connectivity policies using same vhbas but the vhba is only showing up on one of the policy. I have separate task for both of them.here is my pb --- - name: "Configure SAN Connectivity Policy" vars: api_info...
Resolved! service profile template
i am not sure why i keep getting this error The full traceback is:File "/var/folders/0x/b8776q3d3r92tmhjw6pkb9hh0028xg/T/ansible_cisco.intersight.intersight_rest_api_payload_3zsdptym/ansible_cisco.intersight.intersight_rest_api_payload.zip/ansible_co...
Is it possible to define custom Intersight alarms based on metric thresholds?For instance, we are monitoring the memory module corrected ECC errors metric and need to be able to set an alarm for when that metric exceeds a threshold. Is this possible ...
Hi, I have a potential case where 20 C220-M7 servers (each air-gapped) should be installed for video surveillance NVR. Each server is planned to be equipped with 8cores 16GB ram and few TB of storage where the OS will be installed directly (no virtua...
Is it possible to access the DIMM error correction logs through the Intersight API?The SEL logs contain messages such as:bbd | 03/05/2024 13:22:28 AEDT | CIMC | Memory DDR4_P2_H2_ECC #0x99 | read 3 correctable ECC errors on CPU2 DIMM H2 | AssertedIt...
Resolved! ansible domain profile
hi any examples on using ansible to create domain profile? I have the policies in place but want to crewate a profile but assign later.
i am able to create the chassis profile but having issues with assigning policies to it. any idea? I got the values from developer tools - name: "Configure chassis profile" vars: api_info: &api_info api_private_key: "{{ api_private_key }}...
appliance/DeviceClaims not supported? Please see screenshot.
