Resolved! SKU for VMware license
Dear Team Please advise what Cisco SKU for VMware license replacing below SKU VMW-VSP-STD-3A= Thanks in advance
Dear Team Please advise what Cisco SKU for VMware license replacing below SKU VMW-VSP-STD-3A= Thanks in advance
Howdy Folks, Can anyone confirm if the UCS-FI-6454 can support a copper 10GBASE-T SFP+ module, specifically the SFP-10G-T-X? So far, all I've check the optics compatibility matrix and the 6400 spec-sheet and I see no mention of this module being supp...
upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is...
Greetings, thanks for reading. I have NetApp storage attached to Nexus 5k for the FCoE zoning and SAN boot and then to ACI.We simply removed those connections to the 5k and instead directly attached to the Fabric Interconnects and went from twinax to...
Hi Team,I have a blade B480 M5 with 6146 CPU , I am planning to install redhat 8.9 which is supported starting from 4.2(3) but looks like the CNA Adapter does not support on 4.2(3) for this matrix but 5.0(1) is supporting this 1340. Is there any issu...
Hi,We have existing running Hyperflex cluster with HX version 4.0.2c and vCenter/ESXi hosts 6.7 U3. Hyperflex cluster has DNS suffix that is domain XXXX.com and ESXi hosts name is esx1.XXXX.com, esx2.XXXX.com and so on.Can we change the name of the ...
If I modify the Firmware Policy with an incorrect version of firmware and it generates pending activities for hosts to get that on next reboot. But I don't want them to get that firmware version. Do I just go into pending activities and cancel them...
Summary:Can ssh into user-2 admin account using password ssh (or via the Web UI)can not use publickey with ssh, always prompts for passwordUser Guide for C-Series doesn't specify any requirements for public key type/bits that i can findI have ssh ena...
Dearsi have a failed HDD for UCS 220M3 servers "Seagate Constellation.2 500GB 7200RPM SATA 6Gbps 64MB Cache 2.5-inch " i have been on the below link for the HDD specs. but now all those listed in the spec sheet are EOS/EOSupport, so i approached in ...
On some of the servers we manage I'm not able to access CIMC. Either IP has changed (I don't have local access) or its not reachable for some reason. However I can access all the servers through vSphere / ESX. Is there any way I can confirm IP Add...
We are attempting to upgrade our current VMWare environment from v6.7 to v7.0U3.We were able to upgrade vCenter with little trouble.However, attempting to upgrade our ESXi host - we only have one on this particular hypervisor - has not been as easy.F...
Hello,We are going to setup X series newly in one of our locations. Just wanted if there are any best practices to be followed and also need to know if this has to be set up in UCSM or IMM Mode as the datasheets for X series 9508 Chassis are having M...
Hi,I am having a weird issue with KVM Launching in a B200 M5 Blade. When I am trying to launch the console without the service profile, I can get to the console normally, whereas when I am launching the console post association of service profile. I ...
Hi All,I am unable to do the cisco hyperflex (Contains 4 nodes) upgrade from and keeps on getting below error. I have already checked firmware/software compatibility before upgrade and also ran pre-check script with no errors/warning in output. ...
Hi everyone,I am having some issues, we have 3 UCS C240 M5 nodes, that have previously been running using the Hyperflex platform and FI.Now we are trying to repurpose them to run another site for us, my superiors made the decision that we will run th...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM | ||
02-20-2024 12:52 PM | ||
02-20-2024 10:04 AM | ||
02-14-2024 11:29 AM |