• Is NetconfService <edit-config> "operation" attribute implemented?

    Hi,   I want to use ydk.services.NetconfService instead of ydk.services.CRUDService. Looking at sphinx YDK documentation I cannot see "operation" attribute under edit_config() NetconfService method. Per RFC 4741...
    antonabik007
    last modified by antonabik007
  • Change of VLAN on Wireless Guest

    Hi Experts,   Does the endpoint send a new dhcp request after CoA or we face the same limitation as we face in wired where VLAN is changed on the NAD while endpoint remains on the old VLAN IP ?
    umahar
    last modified by umahar
  • Using Prime to configure APs under WLC

    Hello Experts, I have a question from a DevNet user/customer on an open Ticket #2504.  Customer is using Prime Infrastructure 3.2.  Customer asks: Around 5000 APs I have on a project and it needs to be confi...
    matfarre
    created by matfarre
  • DevNet Express DCI [Sydney]

    5/17/2018 9:00 AM
    Read More and Register! What's a DevNet Express event? It's a focused event where you listen, learn, and put what you learn into practice. And this event is all about Data Center Infrastructure. This event is for Cis...
    devnetevents2
    created by devnetevents2
    DevNet Express DCI [Sydney]

    in DevNet

    Back
  • DevNet Express DCI [Auckland]

    5/14/2018 9:00 AM
    Read More and Register! What's a DevNet Express event? It's a focused event where you listen, learn, and put what you learn into practice. And this event is all about Data Center Infrastructure. This event is for Cis...
    devnetevents2
    created by devnetevents2
    DevNet Express DCI [Auckland]

    in DevNet

    Back
  • IPS Variable set - $HOME_NET for East and West FTDs

    Hi,   I was looking for design recommendations for a particular design scenario. I am working on an E/W FW with IPS and I am looking for a recommendation on how to setup the IPS Variable set - $HOME_NET. I ha...
    rodrigogurriti
    created by rodrigogurriti
  • Voice Gateway Package MRCP Question

        I configure the 3945E voice gateway as a mrcp client to connect to the third party MRCP ASR Server(not nuance asr). when the voice call setup. I capture the pcap in the mrcp server , from  the...
    xiaosenweng
    last modified by xiaosenweng
  • ELM - AXL API : Getting License Availble and installed

    Hi, Is there a way to retrieve the license statistics available and installed? I tried to recover them through the AXL API made available by cisco but without success. I retrieve the license number through the fol...
    digiuliantonio1
    last modified by digiuliantonio1
  • ISE AD passive ID

    Hi,   We are positioning ISE Base for AD passive ID. Part of ISE passive ID on AD require some changes in AD. Upon checking on the documentation, the following is the requirement   Set Permissions When AD...
    wileong
    last modified by wileong
  • Setting a profile to an endpoint using ERS API

    Hi, I'm trying to use the ERS API to set a specific profile to a newly configured endpoint. Using the URI "/ers/config/endpoint/{id}" I'm able to create the endpoint. However, when I try to assign a profile to it the ...
    orp@medigate.io
    last modified by orp@medigate.io
  • ISE Health Check Node queries ?

    Hello Experts,   We have few questions on the ISE Health Check Node.   Can we have ISE health check node in node group for redundancy ? Or How can we achieve redundancy for Health Check Nodes ?? If we hav...
    sgudsi
    last modified by sgudsi
  • Oracle Installation When Creating Stack With YAML

    To whom it may concern,   I create a stack in Metacloud with a YAML including Oracle 12c Pre-Installation and Installation silent mode, it is noticed that the Oracle 12c is not installed after the stack is creat...
    jasonzhao@fico.com
    last modified by jasonzhao@fico.com
  • pxgrid on PSN node doing radius

    Quick question for confirmation.   Can pxgrid persona be deployed on a PSN that is also doing radius?  Or if it is deployed on PSN does it have to be dedicated pxgrid PSN and is not able to provide radius/p...
    danhamil
    last modified by danhamil
  • security policy migration tool from Checkpoint to FTD

    Are there any tools available for checkpoint security policy migration to Firepower threat defense security policy?
  • Compatibility between AP 1552H and wlc 5520

    Hello Team,   We are deploying 1552H APs with 5520 wlc for an Oil n Gas major in Malaysia. I wanted to check if there’s any compatibility issue between 1552h and 5520 WLC.   As as per the deployment ...
  • Appliance sizing tool

    Is there a tool or calculation guideline one can use to determine the basic throughput needed for an environment. For example, using the size of the Internet Connection speed, number of internet users, gateway through...
    vikeshramnath6@gmail.com
    last modified by vikeshramnath6@gmail.com
  • ISE medium distributed deployment with pxgrid and SDA

    Hi Team,   We are having a medium deployment for ISE with SDA with the following nodes:   2 x Admin + MnT + PxGrid 2 x PSN   I am concerned with the pxGrid service running on Admin and Monitoring. I...
    mnabeel
    last modified by mnabeel
  • we can't make a call in spaces with more than 25 people.

    Hi   After Update April 16 update , we can't make a call in spaces with more than 25 people in Windows client App.   Is this a new app feature? That feels very inconvenient to us, because we use some spac...
    koichi.arimura@ctp.co.jp
    last modified by koichi.arimura@ctp.co.jp
  • Unable to login to ISE CLI via AD User

    Hi,   Want to confirm whether login to ISE CLI via AD User works?. I am getting access denied error message when i login to ISE CLI via AD User.   Admin user able to login to ISE CLI Login to ISE GUI work...
    palv
    last modified by palv
  • Cisco Professional Assistance

    Please share me some cisco professional contact number   Message was edited by: balu pv
    balupv55511
    last modified by balupv55511