cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1677
Views
0
Helpful
1
Comments
cdnadmin
Level 11
Level 11
This document was generated from CDN thread

Created by: Keith Lunn on 19-05-2010 07:41:16 PM
Hello,
CUCM 6.13
Does anyone know what security role must be granted to an App UID in order to query the RIS port?
I have a program that does an AXL query first (that works OK) and then has to do a RIS port request to:
[url=https://<publisher>:8443/realtimeservice/services/RisPort]https://<publisher>:8443/realtimeservice/services/RisPort
The App ID has the assigned role of "Standard AXL API Access" but it appears that it needs an additonal role to use the RIS port?
Thanks!

Subject: RE: What Security Role is Required for RIS Port?
Replied by: David Staudt on 19-05-2010 09:20:53 PM
Pls see this thread:
 
http://developer.cisco.com/web/axl/forums/-/message_boards/message/1481048?_19_redirect=/web/axl/forums/-/message_boards/search%3F_19_redirect%3D%252Fweb%252Faxl%252Fforums%26_19_breadcrumbsCategoryId%3D0%26_19_searchCategoryIds%3D0%26_19_keywords%3D...

Subject: RE: What Security Role is Required for RIS Port?
Replied by: Keith Lunn on 19-05-2010 10:20:40 PM
Hi David - How goes! Thanks for the resonce. I tried that link and I got:
The requested resource was not found
 
However, with trail-and-error I have discovered that my app uid will work when it is in a group that has the following roles assigned:
Standard AXL API Access
Standard CCM Admin Users
 

Subject: RE: What Security Role is Required for RIS Port?
Replied by: Keith Lunn on 19-05-2010 10:26:49 PM
Davud,
I tried to manual copy-n-paste the link into my browser and it worked ok. Yes, according to Stephan's findings - his answer correlates with mine - they key was "Standard CCM Admin Users" role. - Go figure!
I was trying Standard SERVICEABILITY READ ONLY and others..........I was off in the wrong direction and just for giggles decided to try CCM Admin Users as I have another uid that works ok with RIS - but it also has a ton of other roles configured - so I was trying to figure out the minimum config.
Thanks!
Keith
Comments
Ravi Shekhar
Level 1
Level 1

I was able to figure out the roles required for the AXL and risport:

for AXL you need: Standard AXL API and ccm standard Admin user

For RIS you would need the above two and standard serviceability role for the

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links