Cisco UCS Platform Emulator (2.2(3a))

License Protected: DOC-37866

Cisco UCS Platform Emulator (2.2(3a))

 

New Hardware Features

Cisco UCS Platform Emulator, Release 2.2(3aPE1), adds support for the following new hardware:

  • Added support for the following blade servers:
    • UCSB-B200-M4
  • Added support for the following rack servers:
    • Cisco UCSC-C220-M4S
    • Cisco UCSC-C220 - M4L
    • Cisco UCSC-C240-M4S
    • Cisco UCSC-C240-M4L
    • Cisco UCSC-C240-M4S2
    • Cisco UCSC-C240-M4SX
  • Added support for the following Network Adapters:
    • UCSB-MLOM-40G-03
    • UCSC-MLOM-CSC-02
    • UCSB-VIC-M83-8P
  • Added the following new templates for UCSB-B200-M4, UCSC-C240-M4L/M4S/M4S2/M4SX, and UCSC-C220-M4L/M4S servers:
    • B200M4Large
    • B200M4Low
    • B200M4Medium1
    • B200M4Medium2
    • B200M4Medium3
    • B200M4Medium4
    • C220M4SHigh
    • C220M4SMedium1
    • C220M4SMedium2
    • C240M4SXMedium
    • C240M4SXHigh1
    • C240M4SXHigh2

 

New Software Features

Cisco UCS Platform Emulator, Release 2.2(3aPE1) includes the following new features:

  • Fabric Interconnect-IOM Links Configuration support
  • Automatic update of DB Persistence value to reset DB on performing a configuration change on the control panel
  • Extended Direct Connect Rack support to configure multiple and different adapters on a rack server
  • New default configuration containing a mix of M3 and M4 blade and rack servers


NOTE: From UCS PE 2.2(1bPE1) onwards, UCS PE supports uploading the B-Series and C-Series server firmware bundles.  Because of the large file sizes of the firmware bundles, UCS PE only supports uploading of only the stripped-down versions (attached to this document), which includes only the firmware metadata but not the actual firmware itself in the binaries.  The stripped-down version of the firwmare bundles which contain metadata only of the B-series and C-series server firmware is reduced to approximately 50 kB in size.