Segment Routing Traffic Engineering Lab v1 now available on Cisco dCloud!

[lamarsh]

Overview

This lab provides hands-on experience with segment routing traffic engineering (SR-TE) configuration and operation. The OpenDaylight (ODL) SDN controller is used with northbound REST APIs. Basic knowledge of segment routing (SR) or MPLS, traffic engineering (TE), and IS-IS and familiarity with Cisco® IOS XR configuration are required.Check it out here: https://dcloud-cms.cisco.com/demo/sr-te-lab-v1

Scenarios

• Scenario 1: Configure Segment Routing Traffic Engineering
• Scenario 2: Configure SR-TE Paths
• Scenario 3: Explore SR-TE with Path Control Delegation to a PCE
• Scenario 4: Explore SR-TE with PCE-Initiated Paths
• Scenario 5: Explore BGP SR-TE Dynamic

Requirements

Required	Optional
Laptop	Cisco AnyConnect®

Components

• Cisco SR technology
• ODL SDN controller
• Cisco IOS XRVR 6.0.0
• Cisco PCE and PCEP technology
• Cisco Virtual Internet Routing Lab (VIRL)

Features

Cisco SR Technology	Reduced data storage overhead for routers Packets tagged with path and QoS information Intelligent protocol that does not require all segments to be explicitly tagged Automatic traffic rerouting in the event of link failure Multipath capabilities for redundancy and transmission speed

Topology