cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1699
Views
1
Helpful
5
Replies

2 CME local directory sharing

James.Zheng
Level 1
Level 1

Hi there,

I have 2 CME and would like find a solution to share Local Directory, all IP phone is Java-base and cannot use External Directory, anyone has clue to achieve this by IP Phone SDK?

Thanks,

James

5 Replies 5

amoherek
Cisco Employee
Cisco Employee

Hi James,

Can you explain what you mean by sharing the local directory?

Thanks,

Adrienne

Hi Adrienne

Thank you so much for your email, I have 2 CME at 2 different location and connected with SIP trunk, call between 2 offices just need to dial extension number, but user in one office cannot search another office (another CME) local directory, if I enabled external directory then the local directory will be disabled by Cisco design, so I am thinking if there is other way to share local directory between 2 CME in order to let user search both offices users’ extension number.

Appreciated if you have any idea or clue.

Thanks again for following up this for me.

Best Regards,

James Zheng

Senior IT Infrastructure Consultant

CCNP, CCNA-Security, MCSE, ITIL v3 Foundation Certified

CGI Information System and Management Consultants

6th floor, 1405 Douglas St., Victoria, BC V8W 2G2

Tel: (250) 360-5390

Fax: (250) 388 5018

CONFIDENTIALITY NOTICE: Proprietary/Confidential Information belonging to CGI Group Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivery of this message to such person), or you think for any reason that this message may have been addressed to you in error, you may not use or copy or deliver this message to anyone else. In such case, you should destroy this message and are asked to notify the sender by reply e-mail.

Hi James,

I'm not as familiar with CME as I am with CUCM. Could you try putting both CME nodes in the same cluster? This would allow them to share the same databases.

Thanks,

Adrienne

Thanks Andrienne, no, our 2 CME is in different city and it is totally separate system before, I know if I configure CME SRST the issue won’t exist but the 2 CME need to be totally re-configured, we don’t want to do that.

Anyway, I found alternative way to get both CME to synchronize the local directory, let me know if you are interested in this.

Thanks,

James Zheng

Senior IT Infrastructure Consultant

CCNP, CCNA-Security, MCSE, ITIL v3 Foundation Certified

CGI Information System and Management Consultants

6th floor, 1405 Douglas St., Victoria, BC V8W 2G2

Tel: (250) 360-5390

Fax: (250) 388 5018

CONFIDENTIALITY NOTICE: Proprietary/Confidential Information belonging to CGI Group Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivery of this message to such person), or you think for any reason that this message may have been addressed to you in error, you may not use or copy or deliver this message to anyone else. In such case, you should destroy this message and are asked to notify the sender by reply e-mail.

Hello James,

Could you please share with us the idea to synchronize/share the local directories of the 2 CMEs ?

Thank you in advance

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: