cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1531
Views
0
Helpful
2
Replies

Publish SXP bindings on PxGrid

Krzysztof Grabowski
Cisco Employee
Cisco Employee

Hi Team,

Which bindings are published via pxGrid when we enable the option "Publish SXP bindings on PxGrid" is enabled under "Work Centers > TrustSec > Settings > SXP Settings.

  • RADIUS only ?
  • manual subnet-IP ?
  • dynamic subnet-IP (received from other SXP speakers) ?
  • are bindings from all SXP domains published ?


Cheers,

Chris

1 Accepted Solution

Accepted Solutions

jeppich
Cisco Employee
Cisco Employee

Hi Chris,

Below are the attributes that are published:


SXPBinding= {ipPrefix=192.168.1.1/32 tag=17 source=192.168.1.24 peerSequence=192.168.1.24}

Additional information can be found under SXP publishing in : How To: Configure and Test Integration with Cisco pxGrid using ISE 2.0

Thanks,

John

jeppich@cisco.com


View solution in original post

2 Replies 2

jeppich
Cisco Employee
Cisco Employee

Hi Chris,

Below are the attributes that are published:


SXPBinding= {ipPrefix=192.168.1.1/32 tag=17 source=192.168.1.24 peerSequence=192.168.1.24}

Additional information can be found under SXP publishing in : How To: Configure and Test Integration with Cisco pxGrid using ISE 2.0

Thanks,

John

jeppich@cisco.com


Hi John,

Thanks for quick answer . In the doc on page 117 I can see that the Static SXP mappings from Default domain (ASA and 3750X) are published on pxGrid.

Do you know if this works also for SXP mappings in non-default SXP domains and RADIUS originated? 

Cheers,
Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: