Does cisco ISE 2.1 supports IOS 3.6.6 of Catalyst 3850 firmware

[magadhvi]

Hello Experts,

Can we have any compatibility document available which officially mentions that Cisco ISE 2.1 supports IOS 3.6.6 of Catalyst 3850 firmware,

i am referring below document and It has information regarding 3.6.4 and 3.6.5E but not for IOS 3.6.6

https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/compatibility/ise_sdt.html

[Charlie Moreton · Accepted solution]

The Compatibility Guide you linked states that the version in the matrix (3.6.4) is recommended because:

^1.Recommended OS is the version tested for compatibility and stability.

Any version above that will also be supported.  Also be sure to check out the following link:

Does ISE Support My Network Access Device?

Remember that ISE supports protocols.  As these protocols are built in to Cisco IOS as a base, then anything above the minimum recommended version will also be supported.

There is no way for the testing teams to test every version of IOS that is released to be able to place it into a matrix.