cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
9012
Views
0
Helpful
7
Replies

ISR 4321 Auto Attendant configuration

Hamada Ahmed
Level 1
Level 1

Dears,

Could i configure on ISR4321 IVR or Auto Attendant without CUE only on it's IOS?

7 Replies 7

skilambi
VIP Alumni
VIP Alumni

CUE would be the way to go. CUE licensing is very cost effective and the modules can be hardware or even run inside a KVM container.

Srini Kilambi

Hi Srini,

and what about this document

Yes you can. You should use: CME B-ACD and Tcl Call-Handling Applications

somebody wrote in Cisco supportforums that i can by using this document from Cisco

That’s a very specific hunt group feature that I have also setup for my customers

But if you want a full blown AA then CUE is the best option

Thanks

Srini

Hi Srini,

I just want that all incoming call listen welcome Arabic voice message and after they press 0 , they will go to specific extension ,

so this Document will help me to do this ?

also could i put this Arabic voice message in router's flash?

I don't see why not and you can see this in the link posted

The Cisco Technical Assistance Center (TAC) supports the rerecording of audio prompts used with the Tcl scripts but does not support modification of the scripts themselves. It is recommended that you consider every loopback BACD call as 2 calls for design considerations and call capacity planning. For more information, see the “Custom Cisco Unified CME B-ACD AA and Call-Queue Scripts” section.

Hi Siri,

I didn't get what you mean?

See my link above which was a sub-link from your main link it talks about the same

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: