cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1527
Views
4
Helpful
2
Replies

pxGrid node in Large Network Deployments

skatayam
Cisco Employee
Cisco Employee

Hi,

Can I enable pxGrid service on a node that runs policy service node in Large Network Deployments? Or pxGrid also should be dedicated node?

1 Accepted Solution

Accepted Solutions

Nidhi
Cisco Employee
Cisco Employee

Hi Satoshi,

you can enable PxGrid on a PSN node as well.

But if you have more PxGrid clients subscribing to session information and other topics, you can consider to have a dedicated node for PxGrid.

Scalability numbers for PxGrid can be found here - https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/install_guide/b_ise_InstallationGuide23/b_ise_InstallationGuide23…

Thanks,

Nidhi

View solution in original post

2 Replies 2

Nidhi
Cisco Employee
Cisco Employee

Hi Satoshi,

you can enable PxGrid on a PSN node as well.

But if you have more PxGrid clients subscribing to session information and other topics, you can consider to have a dedicated node for PxGrid.

Scalability numbers for PxGrid can be found here - https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/install_guide/b_ise_InstallationGuide23/b_ise_InstallationGuide23…

Thanks,

Nidhi

The following table depicts supported (QA tested) deployment models for pxGrid:  ISE Performance & Scale

PXG and PSN can only be co-resident in Small/Standalone deployment.  Would it work if enable both on same node?  Possibly/Likely, but not officially supported and we have no performance data for such designs.