Making TAPS work with E164 DNs which start with "\+"

[WilliamEWelch]

TAPS out of the box does not allow configuring a phone with an E164 DN. Our system uses full E164 DNs to provide an worldwide, enterprise dial plan. I modified the TAPS script that runs on UCCX and now one can press * 1 614 424 9999 on the phone and TAPS will register the phone as \+1 614 424 9999 (spaces shown for clarity only). I've attached the E164 version of the TAPS aef file. I only added two lines of code to the script to make it work.

We are running these versions:

UCM 8.5.1.11900-21

UCCX 8.0.2.11003-10

[Roger Kallberg]

Great stuff William!

Thanks for sharing this. It saved me a ton of time since the way Cisco suggest to solve this, according to this url https://supportforums.cisco.com/docs/DOC-13144 seem to require a Premium license. I had a look at what you did in the script and I must say that your way is far easier and also cleaner.

Again thank you!

Sincerely

Roger Källberg

CCIE # 26199

[BRIAN CONRAD]

It works on Premium as well. Good work William. Thanks for posting.

[Ahochau]

I'm attempting to use this in 10.6, and it appears to be ignoring the "allow over writing for any profile" system parameter.  I keep getting "extension is already in use" errors.  Any guesses?

CUCM 10.5(1)

UCCX 10.6(1)