We have migrated away from using mirrored SD cards due to the issues presented in vSphere 7. We are now booting from SAN and using a local disk policy of "No Local Storage" with FlexFlash State disabled. The hosts still have SD cards present, some wi...
Hello all,
I'm trying to upgrade a pair of 9148 MDS switches from 6.2(21) to 6.2(23). I am getting an image verification error when running "sh install all impact":
MDS-B# sh install all impact kickstart bootflash:m9100-s3ek9-kickstart-mz.6.2.23.bin ...
I am upgrading an HX240 cluster from 2.6(1a) to 2.6(1d), and the upgrade has completed successfully on 2 of the 4 nodes. One node fails after the bootstrap, VIB upgrade and reboot steps with the above error. I have re-attempted the upgrade multiple t...
I have 2 environments that were recently upgraded to 3.1(2e). After upgrading, I've found that logging into the CLI with local accounts is failing. It is also failing if I have the console auth set to local, and pass along my auth domain to log in vi...
Hello,
Will there be a published upgrade procedure to do in-place NDUs to the new generation of FIs and IOMs? There doesn't appear to be anything available in the documentation for the 6300s as of yet.
Hey Wesley,
Thanks for your reply. Just to clarify, this is more an issue with logging into the CLI with local accounts than an LDAP issue from what I am seeing. I have created multiple local accounts and am unable to log in via SSH using any of them...
Yes, you absolutely can migrate the local drives and service profile to another blade to rule out a hardware issue. As a precaution, you will want to ensure the scrub policy associated with the profile is set to not scrub the disks on disassociate. T...
I found the upgrade procedure buried in the 5108 chassis install guide.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/chassis-install-guide/ucs5108_install/ucs5108_install_chapter_011.html#task_D80B789F3F4740C5BAFCDB5B54E06CA9
Is it possible to run multiple VIC 1225s in a UCSM-integrated C-series server for applications with greater bandwidth requirements? What about running additional VIC 1225s or another 10GbE NIC option that uplinks directly into a Nexus 5K for a dedica...
