Hi,
on a multi-site installation, I've got some additional requirements to
implement. Currently, two site (CPE) have a tagged ethernet service to a
central site (PE). Now, apart from the L3 traffic, I need to bridge an
additional VLAN from site 2...
I just did some more debugging ... it turns out the VLAN assignment as such work fine, but the controller seems to behave as if a DHCP helper were configured ... so instead of just ignoring anything and letting the DHCP requests be forwarded to the V...
I'm having the same problem on an 1832 ... I need three SSIDs, each on a separate VLAN ... one should be on the default VLAN 1 (untagged), the other two on tagged VLANs. All the APs (the 1832 and two 1815) are on trunk/multi-vlan ports, running in mo...
Haven't tested, but I assume the down event doesn't fire if the track state hasn't been up first ... you might be able to fix this with another event that reloads the router after a certain time after startup ... e.g. by setting a "reload in ..." upo...
Due to time constraints, I have decided to drop the QinQ config with bridging and instead configure PseudoWire to bridge the two vlans ... tested on the trial licenses and works like charm with three lines of config ;) Getting the data license is pro...
