About aperez

aperez · 05-14-2018

We have updated our customer wireless network with new 1562I and 1562D access points. We have diverse clients that wok fine, but we are facing some connection problems with third party clients used as wgb, wlc fail to comunicate randmly and shows err...

aperez · 04-27-2009

Hello, we have two radius servers <Radius_1_PUBLIC_IP> and <Radius_2_PUBLIC_IP> When the first shuts down, the AS5300 Gateway does not change to the backup server.aaa group server radius H323-calls server <Radius_1_PUBLIC_IP> auth-port 1812 acct-port...

aperez · 02-10-2009

Hello, I have the next problem: I've configured a ft group between two ACEs. The active ACE works ok but if the standby ACE becomes active, it doesn' work (I cannot reach port 80).What could this be? Configs are synchronized and I have checked physi...

aperez · 05-15-2018

Well, the use of external antennas is needed because of the size of vehicles, this is a must and have already been tested. We have also check the network performance, survey, channels, etc. Radio parameters are not the problem as the network is corre...

aperez · 05-15-2018

Yes we have some aps to test, but the problem is that our customer is in a very difficult enviroment, so testing in it's production network is not easy. What i was trying to find is what would be the idoneus AP to test and if there were any know issu...

aperez · 05-15-2018

Rigth now, we have mikrotik AP acting as station pseudobrige, what we want to do is change all this mikrotik aps devices acting as clients with Cisco aps acting as a WGB.We have 5508 on 8.5.120.0

aperez · 05-07-2009

Hello, thank you very much for the response.We have tried to configure a global shared key and local shared key:radius-server host auth-port 1812 acct-port 1813 non-standard key 7 radius-server host auth-port 1812 acct-port 1813 non-standard key Bu...

aperez · 02-11-2009

After the changes, all worked ok! Thanks!!

Member Since	‎10-06-2005 07:43 AM
Date Last Visited	‎11-01-2023 06:06 AM
Posts	14

User Statistics

User Activity

WGB design

AS5300 does not change to Radius backup server

ACE: FT (Fault-Tolerant) configuration problem

Re: WGB design

Re: WGB design

Re: WGB design

Re: AS5300 does not change to Radius backup server

Re: ACE: FT (Fault-Tolerant) configuration problem