Hi,We're experiencing problem with our VOIP phones connected to a Cisco 9300 Switch. The phone is an C450HD from audiocodes and unfortunately user are complaining of not able to get through to the phones when calling, or the when phone is ringing and...
It should:http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/layer2/503_U2_1/b_Cisco_n3k_layer2_config_guide_503_U2_1/b_Cisco_n3k_layer2_config_gd_503_U2_1_chapter_0101.html#con_1058645 Do you have the correct license?
You have 3 options:- Either configure 3 static routes on the Router to those subnets- Or 1 default route for all routes to the L3 switch- Or configure a routing protocol on both the Layer 3 switch and the Router so that the Switch can exchange the ro...
Because that is how RIPv1 works. It use broadcast to send updates.In RIPv2 they changed that to Multicast (224.0.0.9).A routing protocol does not use the IP address of it links to send updates, it will use broadcast (RIPv1 only)/Multicast (EIGRP/OSPF...
