About bill-anderson

bill-anderson · 03-10-2021

This bug exists in Cisco Prime Infrastructure 3.9 as well.

bill-anderson · 05-11-2017

What type of information is logged when the Management / Logs / Config / Msg Log Configuration / Trace Info option is checked?

bill-anderson · 03-27-2017

We have a WLC running 8.2.121.0 that has Wireless 802.11b > RRM > Tx Power Control(TPC)) > Minimum Power Level Assignment set to 10 dBm. On a 2802 AP, that should be about power level 5. The WLC Power Level Assignment Method is automatic. The APs are...

bill-anderson · 01-27-2016

I created several configuration templates in Cisco Prime Infrastructure 2.2 under "Features & Technologies" that Prime said were successfully created. However, they do not appear in the list, or anywhere else in PI. I then try to create it again with...

bill-anderson · 03-31-2015

Using CPI 2.2.0, I sent a request to the WlanControllerDetail resource and get incorrect counts for dot11aClientCount and dot11bClientCount. For example, a response will report 134 dot11aClientCount and 241 dot11bClientCount when the GUI Summary page...

bill-anderson · 03-27-2017

I'll try that when we get these APs on their own controller. Thanks for the fast response.

bill-anderson · 08-31-2016

This also happens when trying to distribute software images with PI 3.1.2.

bill-anderson · 06-26-2015

The other error I noticed are with the webacs/api/v1/data/Sites and webacs/api/v1/op/groups/sites queries.The apCount is almost always zero for buildings and floor areas that have many access points.

bill-anderson · 06-25-2015

The workaround will suffice. I hope the other errors I noticed will be fixed in 3.0 as well.

bill-anderson · 06-24-2015

A query to webacs/api/v1/data/ClientCounts?.full=true&key=<controllerIp> produces the correct number of clients.

Member Since	‎07-23-2002 11:46 AM
Date Last Visited	‎03-17-2021 12:10 PM
Posts	20

User Statistics

User Activity

CSCvw60093 - Prime Infrastructures Coexistence tool may not migrate all the wireless maps during force sync

WLC Syslog Configuration

WLC Tx Power Level Assignment

Cisco Prime Infrastructure 2.2 Templates Missing

Why are dot11aClientCount and dot11bClientCount in the data/WlanControllerDetail query response incorrect?

I'll try that when we get

This also happens when trying

Re: Why are dot11aClientCount and dot11bClientCount in the data/WlanControllerDetail query response incorrect?

Re: Why are dot11aClientCount and dot11bClientCount in the data/WlanControllerDetail query response incorrect?

Re: Why are dot11aClientCount and dot11bClientCount in the data/WlanControllerDetail query response incorrect?