Anyone else getting this error?Untrusted SSL Server Certificate (ssl_server_cert_untrusted_issuer) Your request contacted a host which presented a certificate signed by an untrusted issuer. This is typically caused by a Web Site presenting an inco...
Why is my switch showing a static mac entry that I do not have configured?? The MAC address is a multicast mac from a sidewinder firewall that I have statically assigned to two ports, 2/44 and 2/47. Why is it also showing up on port 1/23 which is co...
Anyone ever have a large FTP (500M +), going through a pix 520, fail after 200M or so? I was thinking it was a timeout setting but can't seem to find it. The pix is running ver4.4.
Anyone ever have a router missing interfaces when it boots? I have a 2511 with a serial, ethernet and async interfaces. The only interface that it recognizes is the loopback.
Thanks. This worked for us, but one side note. I had to upgrade the AC client to a newer version. The custom attribute workaround did not work with AC version 4.3. In our case, I upgraded to ver 4.5. so if you find that the workaround doesn't wo...
Steve, we also have sidewinder FW's and I ran into the same thing. Along with the arp entry, you also have to add a static mac entry to add the multicast mac to the sidewinder ports. otherwise, the switch does not know where to send the packets so ...
I had a similar issue, if you have acl's on any of your interfaces, make sure you are allowing the jet direct's ip and port 9100. Not the encryption acl but the interface acl's. Also check to make sure your tunnel is up.