About dennis.maston1

dennis.maston1 · 03-02-2017

I am having a DHCP scope issue with it not offering option 150 although it is configured.4331 Version 15.4(3)S4ip dhcp pool NewVoice network 10.28.26.0 255.255.254.0 default-router 10.28.26.2 option 150 ip 10.146.1.100 dns-server 10.151.2.52 10.151.2...

dennis.maston1 · 03-02-2017

Sorry for the wrong forum.

dennis.maston1 · 05-18-2016

We have a smaller site we support with an aging call manager, recently a new firewall was installed which caused some issues. At this time however we can talk to the networks, all IPs ping each other but we cannot get the GUI to load for CME or CUE. ...

dennis.maston1 · 05-10-2016

Hello, I am working with my partner and ATT setting up a 2921 for IP FLex. The system is working fine currently with a PRI but we are looking to migrate the site to IP FLex. CUCM seems to be setup ok, the CUBE elements seem to be setup ok - however I...

dennis.maston1 · 03-31-2016

Hello, I am trying to register an sx10 with VCS and I am receiving some Sip errors.I wanted to confirm the SX version is compatible with my version of VCS-C & TMS...SX10 = TC7.1.3.db40e55VCSC = X7.2.2TMS = Version: 14.2.0ERROR: SIP Profile Regi...

dennis.maston1 · 03-03-2017

Thank you for your help, once I stepped back I realized I had no route on my router for the TFTP server. Once I added phones grabbed configs and came up.

dennis.maston1 · 05-26-2016

Yes very old version which is scheduled to be upgraded. I'll have to coordinate with a local onsite resource but yes I can grab a capture and look for any blocking.

dennis.maston1 · 05-26-2016

It is not configured and I am unable to add it. CME-HGC(config)#file privilege 0 ^ % Invalid input detected at '^' marker. Version 12.4(11)XJ, RELEASE SOFTWARE (fc1) System image file is c3825-ipvoicek9-mz.12...

dennis.maston1 · 05-26-2016

I should have clarified this earlier. I cannot access GUI from http://10.6.29.1/ccme.htmlI also cannot access via: http://10.6.29.2/ccme.htmlThe local contact says they used http://10.6.29.2/Web/Common/HomePage.do ? to make all changes in the past w...

dennis.maston1 · 05-18-2016

Yes, I have been trying at the proper address but it does not respond. http://10.6.29.2/ccme DIR of flash. irectory of flash:/ 1 -rw- 34237100 Dec 27 2007 21:07:32 -06:00 c3825-ipvoicek9-mz.124-11.XJ.bin 2 -rw- 1826 Aug 6 2007 2...

Member Since	‎07-15-2015 05:28 AM
Date Last Visited	‎09-17-2018 12:53 PM
Posts	34
Total Helpful Votes Received	10

User Statistics

User Activity

4331 : DHCP pool not offering optoin 150 although it's configured

.

CME GUI - cannot access

CUBE - ATT IP FLex

SX10 Version check / Sip & Provision errors

Thank you for your help, once

Yes very old version which is

It is not configured and I am

I should have clarified this

Yes, I have been trying at