About derek.fraser

derek.fraser · 05-07-2018

There a couple client choices for python to generate a soap request to access data from CUCM. Not trying to reinvent the wheel I used examples that were readily available online for another client that hasn't been updated/supported in a while.At the ...

derek.fraser · 12-22-2022

Thanks @rchaseling for the input, do you end up seeing your dial-peers busy out and how do you end up tackling? After reading that bugID from @Carl Ratcliffe I saw it was to have no conn-reuse under the tenant, I had it globally in voice service voi...

derek.fraser · 12-22-2022

I'm experiencing the same treatment with constant %SIP-5-TLS_CONNECTION failures running a 4431 and IOS-XE 17.7.1a. Below is a short sampling but it's occurring constantly.Dec 22 10:03:08.474: %SIP-5-TLS_CONNECTION: Connection failed for addr=52.114...

derek.fraser · 12-20-2022

After thinking about this a little more @dstaudt did provide a solution. Understanding that updateCss/removeMembers doesn't recalculate the index, we can use getCss first to collect the existing members list. Now that we have the CSS partition list...

derek.fraser · 12-19-2022

Was there ever a solution found for this one? I'm seeing the same treatment when using removeMember, the member is deleted but the API doesn't adjust the index of members downstream of the removed. Can confirm if you hit save on the CSS in CUCM it ...

derek.fraser · 12-16-2022

+5 dcburleigh. This saved me some time. In case someone stumbles on this in the future the API will react differently depending on the AXL request. In the past I've used getLineGroup to collect existing members and lineSelectionOrder, then updateLin...

Member Since	‎09-26-2013 09:50 AM
Date Last Visited	‎03-01-2024 12:02 AM
Posts	42
Total Helpful Votes Received	95

User Statistics

User Activity

CUCM Device Registration Status from RIS via zeep

Re: Direct Routing for Microsoft Phone System with Cisco Unified Borde

Re: Direct Routing for Microsoft Phone System with Cisco Unified Borde

Re: CSS removeMember in AXL for CUCM 9.0 doesn't work correct?

Re: CSS removeMember in AXL for CUCM 9.0 doesn't work correct?

Re: updateCSS error