About Bhunt 410

Bhunt 410 · 04-15-2015

Does anyone have an example they can share to update the speed dials of a device profile, or any device really in this format? <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="http://www.cisco.com/AXL/API/10.0"> ...

Bhunt 410 · 01-07-2011

I have tried the tips I have received from a search here by adding prefixes and the numbers, but the fax press still can't make out DID. It receives the faxes, but doesn't know where to address them. dial-peer voice 3529 potsdestination-pattern 352...

Bhunt 410 · 11-30-2010

I have a customer who wants to send a inbound call to a 800 number once its dialed. I was going to do a CTI route point and point it back out, but I'm looking for some other options. Does anyone know if I can send it right back out from a 2811 rout...

Bhunt 410 · 03-09-2009

Currently we are stepping out our monitoring efforts for customers. I got the following error on CCM6. This one is kinda odd to me. In RTMT I do see errors, but I'm kinda lost. Any help is appreciated [SYS FAIL] Warning - Stored Events Rate Excee...

Bhunt 410 · 04-17-2015

Thank you so much, we have a working script.

Bhunt 410 · 07-05-2012

If its not happening for every call you are correct that it can be a IOS upgrade that fixes it or that those transcoders are already being used when they try. They can do 4 transcode sessions on that gateway. If you are in a large deployment they ...

Bhunt 410 · 07-05-2012

1st thing I usually do when I have audio problems is end to end pings to ensure IP reachability. The 6921 phones couldnt possibly be in a subnet that has reachability and the others maynot if they are in different locations.

Bhunt 410 · 07-05-2012

IF you are using G729 are the calls coming in from the PSTN? If so you will need to use a Hardware to transcode the call. you can go look at your DSPFARM to se eif you have a transcoder configured with G729. It should look simular to thissccp loc...

Bhunt 410 · 07-04-2012

As stated above usually when supplementary services aren't working its usually to some sort of media resorces. 1. Ensure you have created media (MTP's in this case and have them assigned to a MRG.2. Ensure your phones have a MRGL assigned which can...

Member Since	‎05-23-2007 06:59 AM
Date Last Visited	‎09-28-2018 12:06 AM
Posts	24
Total Helpful Votes Received	5

User Statistics

User Activity

SOAP update to device profile speed dials in CUCM

Faxpress with 2800 not receving DID

is it possible to send a Inbound call right back out the gateway

Stored Events

Re: SOAP update to device profile speed dials in CUCM

Problem to transfer external calls

One way call Audio

Re: Problem to transfer external calls

Problem to transfer external calls