Do not follow the complete network picture e.g. how are you connected to PSTN (e.g. ISDN PRI/BRI), what gateways are used (MGCP, H.323) etc. And importantly what are you try to match the incoming numbers to? e.g. incoming 2-digit number to 4-digit i...
1) Prior to 12.2(11)T, number translation for incoming call is done AFTER dial-peer matching. So number translation is performed and your Radius records will show 7777 prefixed to the number.2) In 12.2(11)T Carrier Based Routing Feature on IOS chang...
That means that timeslot #24 will be busyout, when their is no active call on this timeslot (soft busyout). The command shouldn't appear by itself i.e. not a default command on IOS. You may remove it, if you don't want to busyout this Timeslot (TS)...
Dial-peer (i.e dial-peer voice pots) matching for inbound calls from PSTN takes the following order:1) Match the DNIS with incoming-called #2) match the CLI with answer-address3) match the CLI with destination-pattern4) use the 1st dial-peer with co...
You ask a tough Q in very simple words ;-)Since you mention managed IPT, hence I suppose Cisco CallManager (CCM) or CallManager Express (CME) based solutions will be the core of such a managed service. These products allows the flexibility to offer a...