Hello,
I am trying to understand correctly the max-dn function of the Basic SRST mode for IOS 15.5-3-M5
Actually, we would like to have 40 different ephones (max-ephones 40) with 2 DN each registered to the GW (so 80 DN), but each DN would need the p...
Hi,
I'd like to route incoming calls in a PSTN Gateway originating from a CUCM (SIP) based upon the calling number.
Here's the scenario: we are using Standard Local RG to route call to the appropriate GW upon associated Device Pool. Within' the sam...
Hello,
I have read a little bit about Dynamic ePhone Hunt Group Membership, but I am not sure that this is exactly what I need. I would like to achieve two things with a hunt-group configured in a Gateway for SRST purposes. Phones will register to ...
Hi, I am trying to figure out how to use the Called Party Transformation Pattern over a SIP Trunk to display something different than the destination number on the phone screen of the person who dialed.
Here's the goal: we do have a route pattern 514...
Hello,
I notified over years that Cisco CUCM Web Page Display may be in different language, depending, I guess, on your system (PC) parameters. But I can't seem to find how it really works.
I have a PC configured in French Canadian. Both OS Win7 and...
Ok, I found it back, and it is in the admin guide:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_setting_up_using_sccp.html
Search for: number octo-line
But...
I can't seem to find the document where I read that. The page I looked for a few days ago is now 404 not found, and all other documentations kind of differ. It was a command parameter, similar to "preference". Anyways, it works now, and I can see how...
Thank you for the fast reply.
So, if we want any of the 80 DN to receive up to 8 calls each, it would be:
max-dn 80 octo-line
right ?
If so, then what is the "number" parameter for within' that command ?
Thank you
Hello Jaime,
Thank you for the reply. Actually, we would like to keep using basic SRST feature (call-manager-fallback).
What I'd like to achieve is send any incoming call in SRST mode to either 1 random registered DN, or broadcast to all of them....
Hello Evgeny,
Thank you for the answer. I did try the Remote Number option as you suggested, and it works, but I'd still like to know if we can achieve this from the "called" point of view. Let me explain. This is to be configured for an internal he...
