About glen.cobby

glen.cobby · 08-30-2017

Hi, I am having an issue with a site I am trying to cutover using a Cisco 4321 ISR, with the NIM-2BRI-NT/TE. I can get the call in and it connects fine however I get no audio in either direction.The circuits work fine when connected to the existing P...

glen.cobby · 02-08-2017

Hi All,I am using Python with suds-jerko. I can add a new DN ok, however I need to add an Enterprise Alternate number, looking at the element for update line, I can see I either need the uuid of the line or use pattern and route partition. I have tri...

glen.cobby · 02-19-2010

Hi All,I am trying to setup ESXi in my lab for testing purposes. I have used the Cisco OS 2003.1.5a.iso as this passes the hardware detection. It all installs fine and I can also install UCCX 7.0 without an issue.However when I go to browse to the ht...

glen.cobby · 10-21-2017

Hi, We finally got to the cause of the issue. We ended up replacing the NIM BRI module and after the replacement of the module the calls started working fine with two way audio! There was no indication that the hardware was faulty. Thanks Gle...

glen.cobby · 02-03-2017

Thanks for the example will have a look at see what I can get together, it seems like I may end up using suds and requests to get what I want done.ThanksGlen

glen.cobby · 02-02-2017

Hi Brad,I know this is an old post but there are lots of useful examples on here. I am trying to write some Python code to carry out various tasks using AXL, using Suds-Jerko. I wonder if you have an example code of how to add a phone and line. I can...

glen.cobby · 08-30-2016

Hi Anil/Michael, I am also seeing an issue with 'Interval too brief' just wondering if you found a solution for the issue? Thanks Glen

Member Since	‎08-27-2009 04:15 AM
Date Last Visited	‎02-23-2024 12:04 AM
Posts	10

User Statistics

User Activity

4321 isr BRI

Python CUCM 10.5 AXL updateLine

UCCX 7.0(1) + ESXi + Lab

Re: 4321 isr BRI

Re: python client for AXL

Re: python client for AXL

Hi Anil/Michael,