Dear Friend,
I am facing issue to configuring ITD in nexus 9504 switch as i am getting below error
N9K-CORE-SW01# sh itd ITD-N9K statisticsERROR: Cannot get pbr statistics data, please enable ITD statistics.
While i have already enable below fe...
Hi Friend,
please suggest on below query.
1) How many ports we can bundle per port-channel in between MDS-9250i and MDS-9710 ?
2) Where we have to configure Zone in core switch where Storage is connected or on FCIP switch ?
Please suggest.
Thank...
Hi Friend,
Please confirm that can we configure Nexus 9372PX to connect SAN and Server for storage data.
Can we configure Zone in Nexus 9372PX.
Thanks
Ganesh Prasad Gupta
Dear Friend,
Please suggest to achieved the below requirement.
As per customer requirement we have to connect SAN STORAGE and Server on Nexus 5548UP switch. So below configuration is required on Nexus 5548UP
1) Single zone creation to communi...
Hi Friends,
I am facing high CPU utilization issue in cisco 2960X switch.
Please go through the below log
switch#show processes cpu monitor | exc 0.0CPU utilization for five seconds: 80%/1%; one minute: 80%; five minutes: 80% PID Runtime(ms) In...
Thanks for prompt response Philip D'Ath !
i got config shared by you , but i am not sure it will be work on ASR1000X or not as i have not reconfigured these devices in port-channel & port-channel sub-interface in ASR router ,so am not sure.
ASR1000XR...
Hi Wesley,
Thanks for your kind response.
That switch model in Nexus 3548 but the problem is same and as per the shared URL we are getting same status.
One thing i am not sure the by configuring qos it will affect on all physical port of nexus as ...
Thanks Leolaohoo..Two more thing i would like to know 1) As per you we can similar in vice versa case if we want to create 24 port switch as Master and 12 Port as Slave one.2) Is it possible to create stacking in between both switch (3750 X) but bot...