About jshakyan

jshakyan · 05-27-2016

Hello Experts,My customer is looking into deploying 802.1x, EAP-PEAP with EAP-GTC and an inner protocol. They want to use hardware token card as an additional security in case the laptop got stolen. Does anyone see an issue or anything we need to kno...

jshakyan · 11-05-2009

I configured identity static NAT on my ASA specifying a range I.E. "static (inside,outside) 10.10.10.0 10.10.10.0 netmask 255.255.255.0 and now the outside users cannot connect to inside WEB server which has IP address of 10.10.10.51. Do I need to cr...

jshakyan · 02-02-2003

Here is a link for SSH configuration that outlines the version and commands to enable SSH on IOS router.http://www.cisco.com/warp/customer/707/ssh.shtmlJS

jshakyan · 12-22-2002

What is in list 1? Remember that PIX will try to do a NAT also. Make sure you've configured NAT 0 on the PIX to disable NAT for the LAN or create a approproate NATing on teh PIX for servers.JS

jshakyan · 12-21-2002

IOS version 12.2(13)T supports Multipoint GRE feature which will allow your GRE tunnel at the ADSL side to use a dynamic IP address. Search CCO for mGRE and DMVPN (dynamic multipoint VPN) documentation.

jshakyan · 09-13-2002

Simon,If you have registered access to CCO then you should be able to access to this link. Hope this helps.http://www.cisco.com/warp/public/707/index.shtml#pixJoseph

jshakyan · 09-10-2002

If I understand you correctly, you mean applying the same ACL on the same PIX firewall's inside interface (for incoming traffic from inside LAN) and then use it as a crypto_ACL. If this is the case then it will of course go through the interface ACL ...

Member Since	‎09-08-2002 10:19 PM
Date Last Visited	‎09-25-2023 03:27 PM
Posts	12
Total Helpful Votes Received	5

User Statistics

User Activity

EAP-GTC

Identity Static NAT

Re: supported SSH image on Enterprise IOS

Re: PIX - Router issues

Re: VPN Tunneling With Dynamic IPs

Re: Pix and firewalling beginner

Re: Order of ACL´s