masyamad
Cisco Employee
Cisco Employee
Member since ‎06-02-2010
‎09-15-2022

User Statistics

  • 95 Posts
  • 0 Solutions
  • 10 Helpful votes Given
  • 18 Helpful votes Received
Recent Badges
50 Replies
10 Helpful Vote
1 Helpful Vote
20 Replies
10 Replies
5 Replies

User Activity

Hi ISE dev/doc team,   My customer is considering ISE node failover operation during each node failure so  evaluating the functional impact on each failure. Now admin guide shows secondary MnT is 'read-only', but we haven't fully understood the actua...
Hi dev team,   AFAIK when I enabled debug by cli command (like debug backuprestore 7), the debug log will be recorded in ADE.log on ACS. But on ISE, ADE.log doesn't have any debug output even with debug all. I tested ISE2.3 and 2.4 then got same resu...
When I swap MnT primary/secondary in 2 nodes deployment, usually use role dropdown in deployment nodes menu as follows. But I notice the operation is not documented in administration guide.   https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/ad...
Sorry for the quick question. But now I can't find ISE command to check interface link status. For example, now eth1(gigabitEthernet 1) stays admin:up, link status:down   C:\>snmpwalk -c ro -v 2c 192.168.10.1 1.3.6.1.2.1.2.2.1.2.3IF-MIB::ifDescr.3 = ...
Hi dev team,   I found following critical messages about secure boot in CIMC SEL.   * It occured on brand-new SNS-3595 without any upgrading/downgrading CIMC.   ISE-CIMC /sel # show entries<...snipped...> 2018-10-05 02:07:54 Critical      "System Sof...
Community Statistics
Member Since ‎06-02-2010 06:43 PM
Date Last Visited ‎09-15-2022 09:30 AM
Posts 95
Total Helpful Votes Received 18
Helpful Votes From
Helpful Votes Given To