One way to skin this cat might be to NOT enable netflow metering on the MPLS side interface in the 2811 and try INGRESS/EGRESS on the other side. You should be able to see all of the traffic on all interfaces.. You arejust moving your observation poi...
Ican confirm that this will work on layer2. My 3750x with the 3kx sm is completely flat and I'm exporting from it. Configuring the flow monitors can be a little tricky with ingress/egress. But it works fine!
You need the Service Module (C3KX-SM-10G). That module contains specific silicon for Netflow and macsec. The nom doesn't.Sent from Cisco Technical Support iPhone App
I realize this isn't answering your exact question, but have you considered using a Netfllow probe such as fprobe or nProbe?http://sourceforge.net/projects/fprobe/http://www.nmon.net/nProbe_nmon.html These are both free and/or low cost means to the s...
This can depend on what software you are running . The command set is different between Native IOS and "hybrid" IOS/CatOS Systems too.Functionality also differs between Supervisors.This should help you determine the commands needed to turn netflow on...
