About Daniel Reibestein

Daniel Reibestein · 05-23-2017

When Installing the Cisco Unified TAPI for a third party software, we can't find any audio device to connect to. We use a Win7 plattform We used the the following dev guide: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/tapi_dev/10_5_2/CUCM...

Daniel Reibestein · 05-30-2016

Dear all, I was updating several different Telepresence Systems from TC7.3.4 to TC7.3.6 and was facing an issue with the TelePresence Profile 52 Dual (C60) Systems (3 Systems). I installed the files on the "Profiles" and could see that the Version T...

Daniel Reibestein · 12-01-2014

Hi, When configuring and saving something on CUCM 10.5 with multiple browser tabs open, I receive the following error:-------The attempted action was a violation of security protocols and will not be allowed. This may be caused by having multiple con...

Daniel Reibestein · 04-15-2014

Hi all,I have some few users that have a problem with the webex reminder from cisco Jabber (9.2.2) - 10 minutes before the meeting, there comes a popup which shows "meeting will start in 246095968 minutes"I have no clue where i could start troublesho...

Daniel Reibestein · 05-28-2017

Hi Pradeep,Thanks for your help, we will have a look at the Guide.Best RegardsDaniel

Daniel Reibestein · 05-24-2017

Hi Pradeep,Thanks for your feedback. But even when we use the Media driver, we can't a find an audiodevice in Windows (7).Do you have any clue what could be the problem?Best RegardsDaniel

Daniel Reibestein · 12-03-2014

I know that this Topic is very old, but I was facing the same issue. The solution is:Connect via CLI (SSH) to WLC and type "debug fastpath cfgtool --dump.sfp"you dont need to type "FP0.", thats part of the output I censored the output with XXXXXX:(Ci...

Daniel Reibestein · 12-01-2014

Thanks for your fast reply, I'll wait for some days until I mark that as correct answer, perhaps there is a way to establish that

Daniel Reibestein · 08-25-2014

Thats exactly the point, we found out that the incoming dial-peer didnt work properly.We have configured a new one with "incoming called-number" instead of a "destination-pattern"(+DID) and it seem to work fine. Thanks for the explanation and confirm...

Member Since	‎06-14-2012 02:38 AM
Date Last Visited	‎03-01-2023 04:13 AM
Posts	15
Total Helpful Votes Received	25

User Statistics

User Activity

Can't find file "OEMSETUP.INF" as described in the TAPI dev guide

Updating TC7.3.4 to TC7.3.6 / TelePresence Profile 52 Dual (C60)

CUCM 10.5 multiple tabs - security violation

Meeting will start in 246095968 minutes - Jabber with Webex integration

Re: Can't find file "OEMSETUP.INF" as described in the TAPI dev guide

Re: Can't find file "OEMSETUP.INF" as described in the TAPI dev guide

I know that this Topic is

Thanks for your fast reply, I

Thats exactly the point, we