I develop SIP endpoint device which I'm testing against CUCM v14.
My device allows multiple line registrations with CUCM. If I only populate a DN for Line 1, I'm able to register over TCP just fine. However, once I add a second DN to Line 2, CUCM get...
Hello,
I’d like to get my company enrolled in the new Developer Advisor portal in the Developer Role so I can submit solutions for testing.
How can I enroll?
Thanks
Hi,Our company manufactures a custom SIP endpoint.We have a customer who is having trouble answering incoming calls from the PSTN over a PRI. When they attempt to answer the call with our device, the endpoint responds to the INVITE from CUCM with an ...
Sure, but what is the program called?
According to this ebook (https://ebooks.cisco.com/story/developer-role-overview/page/6/1) I found, it appears one must be invited. How do I locate my "Cisco Representative" to contact?
Adrienne,A codec issue has been my suspicion as well. I'm wondering if the incoming call on the PRI is using G.722. The customer said they were able to use a SIP instance of IP Communicator without issue. I've asked them to provide a wireshark trace ...
