About Ricardo Sicheran

Ricardo Sicheran · 03-31-2015

Hi Guys,I need some help with my CUIC and a TAC engineer recommended I visit here.The issue is that I had a perfect running report used to create a dashboard but wanted to optimize space by abbreviating some words.I did this by first copying the unde...

Ricardo Sicheran · 06-07-2012

Hi there,I have a customer who needs two endpoints to call each other from one meeting room to the other over ip only.Does the Telepresence SX20 or other enpoints support this? Also do you have a config examples to register Telepresence endpoint to ...

Ricardo Sicheran · 05-17-2012

Hi,I tried implementing internal transcoding on a Cisco 2431 IAD with no success. The setup is that from SBC inbound codec must be set to g729br8 first and then to PBX outbound codec must leave IAD at g711ulaw.Can you give any advice as how to achie...

Ricardo Sicheran · 03-27-2012

Mar 27 16:49:27tvcs: Event="Response Sent" Service="SIP" Src-ip="my ip address" Src-port="5060" Dst-ip="95.211.169.4" Dst-port="5062" Protocol="UDP" Method="OPTIONS" To="sip:100@1.1.1.1" Response-code="482" Level="3" UTCTime="2012-03-27 21:49:27,038"...

Ricardo Sicheran · 03-05-2012

Hi All,One of the security measures that I am thinking of to restrict access to our VCS Starter after assigning it a public ip is to allow https access only if the admin's browser certificate matches that of the VCS. I am uncertain if I can use the ...

Ricardo Sicheran · 04-01-2015

Jack,Thanks for your reply and advice.I will try your recommendation and provide an update.

Ricardo Sicheran · 01-31-2013

Hi Dejan,My company has three clusters. We deploy MP 8.5 at all three regions and integrate with Webex. We have some challenges that I am currently reviewing what might be the best method to make the deployment more efficient.Here are some of the c...

Ricardo Sicheran · 09-28-2012

5 stars*****Nice doc!

Ricardo Sicheran · 06-07-2012

Magnus,Thanks for the insight. I think I will actually try to unregister the enpoints at my office and try to call them direct.Ricardo.

Ricardo Sicheran · 05-17-2012

Thanks for the advice. I will look out for what you said in my next attempt.

Member Since	‎10-01-2010 08:08 AM
Date Last Visited	‎09-25-2019 12:21 AM
Posts	33

User Statistics

User Activity

Create Fields blank after modifying custom report definition in CUIC 8.5

IP to IP endpoint call possible without call control?

sip to sip codec change from g729b to g711u

VCS-E search loop detected...

How do I utilize certificates in VCS for restricted https access

Re: Create Fields blank after modifying custom report definition in CUIC 8.5

Ask the Expert: Installing, Configuring, and Troubleshooting Cis

Re: CUCM IP Phone (SCCP) Keepalive and Failover Architecture

IP to IP endpoint call possible without call control?

Re: sip to sip codec change from g729b to g711u