Hi all,I am using standalone CVP and I have installed VVB at the hub site. All calls coming from the branch gateway are configured to be sent to the VVB. How can i configure survivability on the ingress gateway? Here is the configuration on the gatew...
Hi all,I am using CUBE as SIP gateway. When i run "show call active voice brief" command, all the calls have the same call id 1 or 0. So it is hard to track calls at the gateway. Is it normal? Does anybody know the reason of that?
Yes, calls are generated from CUCM. When we generate the call from PSTN we get a usual call ID for the call legs. Additionallay, not only null, i also see 1 as the call id when the call is generated from CUCM:From 3925: 1 : 77849 13:55:21.747 Tur...
Here is another sample output from another sip gateway(this is not CUBE, it is AS5400)0 : 360645 12:32:18.042 Turkey Mon Dec 9 2013.1 +5800 pid:1 Answer XXXX active dur 00:00:17 tx:1/160 rx:870/139200 IP :30262 SRTP: off rtt:0ms pl:14470/0ms lost:...