About sampathss

sampathss · 12-19-2019

If the customers are running impacted code, and running web-auth/ web-redirect what would be the impact? If they are running ip http secure-server for the https redirects, it would be impacted. Is there any workaround specific to that if the custo...

sampathss · 11-08-2019

Hi,Is it possible to get the session information using a specific IP address? There is an option to search by mac address, but wondering whether it's possible to do that with IP address? This is on ISE 2.4

sampathss · 02-21-2019

Hello, Performing Wired Guest. On switch, authentication order is mab dot1x, priority is dot1x mab. Dot1x is enabled on the Native supplicant on the end user PC. Only wired guest is required to be done for this PC. Wired guest redirect works fine,...

sampathss · 10-03-2018

Hi, Is there a way to monitor the following ISE Services through SNMP? Database Listener Database Server Application Server Profiler Database ISE Indexing Engine AD Connector M&T Session Database M&T Log Collector M&T Log Processor

sampathss · 09-25-2018

Hi, I'm looking to see whether there is any option to export all the guest user accounts from ISE 1.3 and import it back to ISE 2.4. I see that there is no direct option from the GUI. Thanks Sampath

Re: 3rd party Network Device Profiles · 01-22-2020

Hi Jason, Do we have a Network Device Profile for Broadcom switches? If so, is there any documentation on the same that can be used to create the profile? Thanks Sampath

sampathss · 11-12-2019

Thank you Hsing. Will check it out.

sampathss · 03-07-2019

This is with Windows Native supplicant. Switches are using the legacy style. No re-auth timers are sent from the ISE. At this point we have asked them to use a dedicated switch just for wired guest instead of doing both dot1x and mab on the same sw...

sampathss · 11-14-2018

It send the traps only when the processes start and not when it's stopped. Is it probably best to use the built-in alarms for the process stop?

sampathss · 10-11-2018

I understand that this cannot be achieved through SNMP Polling. Able to see the status Running through the SNMP Traps, but will the it send the traps even when the process is stopped as well? Sampath

Member Since	‎09-21-2012 11:47 AM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	43
Total Helpful Votes Received	6

User Statistics

User Activity

Field Notice-Self-signed certificates expire on IOS with ISE webredirect

ISE Monitoring Rest API with IP Address

ISE 2.2 - Wired Guest with Dot1x enabled on Native supplicant

Monitor ISE Process through SNMP

Cisco ISE 1.3 Guest User Account Export and import to ISE 2.4

Re: 3rd party Network Device Profiles

Re: ISE Monitoring Rest API with IP Address

Re: ISE 2.2 - Wired Guest with Dot1x enabled on Native supplicant

Re: Monitor ISE Process through SNMP

Re: Monitor ISE Process through SNMP