Are these circuits frame-relay , ATM etc...either way you could do LLQ or CBWFQ .CBWFQ over Frame http://www.cisco.com/warp/customer/125/cbwfq_17920.htmlLLQ over Frame http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t...
Yes it is possible.Do a show int atm 1/1.0 you will see something like this.d11-5-7206-15#show int atm 1/1.0ATM1/1.0 is up, line protocol is up Hardware is ENHANCED ATM PA MTU 4470 bytes, BW 149760 Kbit, DLY 80 usec, reliability 138/255, txloa...
You may want to make sure that your telco is doing translation mode on the FRF8 if not have them switch to Translation .Some frame swtiches have Transparent mode as the default.check out these URLS.http://www.cisco.com/warp/public/121/atm_frf8.htmlht...
Try configuring the new style PVC configuration and see if that makes a difference.interface ATM2/0.1 point-to-point description UNSUSED ip address 192.168.111.1 255.255.255.252 pvc 1/40 vbr-nrt 34000 34000 Thankssuresh
