I have a switch stack of 3 Catalyst 3850's (WS-C3850-48P) running software version 03.06.00E code. Can a WS-C3850-48U-L switch be added to this stack and what changes must occur?
Do IP DHCP Snooping, IP Source Guard, and Dynamic Arp Inspection all use the same database or table? If not, which table does each use? The switch platforms in use are the Catalysts 6500's, 4500's, and 3850's.
Will the Cisco Catalyst 4500 E Series chassis operate using different wattage power supplies? For example, if the chassis is operating with one 4200 watt power supply, can I add a 2800 watt power supply to the same chassis?
On the Catalyst 4500 series switches the "show interface link" command will display the down time for each port. What is the equivalent show command that works for the Catalyst 3560 series in particular and other Catalyst series in general?
It sounds like the VPN at your work office is configured to not allow split tunneling. You'll probably have to discuss this with your system administrator.
Within your Cisco VPN client, try going to Connection Entry - Modify - Transport. Under Transport, look to see if the Allow Local LAN Access box is checked.
