Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
How to postpone DNS lookup until after ISP DHCP lease
by bcerny -
Apple Devices not trusting public CA signed cert when connect 802.1X
by kshah2589 -
SDA DNA Centre
by N3om -
Display Out Of Range During Boot
by ebtysamkhantanoli -
How to enable R flag (R-bit) in ipv6?
by michal-miac -
C9500-24Y4C - HA - DAD and/or ePAgP
by Rassic -
dhcp failed. apipa is being used.
by reesha -
Deploying Radius on Catalyst 3750 - Mini ISP Scenario
by zhir
Community Activity
FTD Route Based VPN
Hi We have to configure a RB VPN and am wondering if I add the new VTI Interface to The exsisting outside security group or do I have to create a new security group, the outsdide Security group has the Internet facing Interfaces in it.??Thanks
CP-8841-3PCC-K9 IP phone starts with enter activation code
I just bought a brand new CP-8841-3PCC-K9 IP phone from an online dealer here in Germany.When trying to connect the phone to my router fritzbox 7490 I get a starting picture on the phone asking me to "enter activation code". Just that, not "enter act...
Resolved! SCIM API Failure - Org ID not found
I'm looking at the SCIM API and cant get a query to go. Tested with both search and get with same error that comes up saying that the orgID is not found. Tested with my Full Admin token and integration with the identity:people-read scope. Tested fr...
SDA DNA Centre
HIIs it possible for me to manage switches thats are not part of our SDA Fabric, they are in a dufferent part of the Network, i would like to manage these via DNAC so I could use DNAC to upgrdae Images etc, if its possible could someone tell me how ...
Display Out Of Range During Boot
On servers I've set up recently, I'm getting Out Of Range messages during boot. I get the Dell "BIOS splash screen" for a few seconds, and then it's Out Of Range until partway through Windows showing the spinning wheel. This is causing problems, bec...
A frame with a tag such as native vlan.
If a frame with a tag corresponding to the native VLAN enters the trunk port, will the switch take down that frame and send it on over the trunk link as untagged, or will it send it with a tag corresponding to the native VLAN?How I understand it:(Let...
pFsense on Cisco ASA 5505
I have Cisco ASA 5505 firewall on wich I wanted to install pfsense. First problem I had was to small CF(128MB) so I went and bought CF with 8GB of space. I used old computer to install pfsense on this CF, and I then noticed that pfsense is using ZFS ...
How to enable R flag (R-bit) in ipv6?
Hi,how to manually enable the R flag (R-bit) in ipv6 config, let us say in a cisco csr1000v?I have this documentation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/command/ipv6-cr-book/ipv6-i3.html#wp1103499300but unfortunately I could only ...
FMC Multiple Domain Management and external users
Hello, We want to create subdomains in our FMC and add a specific FTD device to each subdomain. I have created two sub domains in the FMC and added one FTD device to each subdomain. It works when I create local users and assign them to a specific su...
Lots of mac flapping and Cisco > Netgear STP setup
So in our environment we have a cisco and netgear devices. Specifically 2960x and gs7xxtpv2(netgear). Our core 3750 is using rapid pvst (it shows up as rstp) and all of our netgear devices are set to rstp. We only have 2 vlans so it's a rather small ...
How to postpone DNS lookup until after ISP DHCP lease
A branch office router is configured to connect to the HQ VPN hub router. The tunnel destination is 'dynamic' and there is an IKEv2 client configuration stanza to help with this. Here's a chunk of the startup config:ip domain lookupip name-server 200...
Cisco FPR1140 ikev2 site to site tunnel-FTP application dont work
Hello, I create Ikev2 site to site tunnel between two cisco FPR 1140. I have same subnet on both location and i used source and destionation NAT in one site. My user try access over web some aplication and it is work, but when other site try to acc...
Port setups for access points
I feel like this should be a relatively straightforward question but I can never find a clear answer so maybe it depends on the environment. In our set up we have a combination of netgear gs724tpv2 and Cisco 2960x. It's a very simple environment we o...
How to connect an extended node with another extended in sd access
Hi, We always connect an extended node with a fiab but you can connect an extended with another extended in sd access ? Thanks in advance. Ciro Gustavo Mele
Setting Up Factory Default Device Using WebUI for cisco ISR1100-4G
Hi I tried to write these commands in CLI (using Putty) for cisco ISR1100-4G but it seems like the VLAN command is not recognized.Regards,Aria Step 1Ensure that the router is in the factory fresh mode. If the router is not in the factory fresh mode,...
