The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hi TeamNeed help with files uploaded to cisco ise repository. All settings related to FTP and file permission done but yet couldn't access files in the repository. See below error message: XP-ISE-02/admin(config)# repository ftp-repoXP-ISE-02/admin(c...
Hi, We always connect an extended node with a fiab but you can connect an extended with another extended in sd access ? Thanks in advance. Ciro Gustavo Mele
Anybody know if there is UCCE 14 planned? If yes what is the ETA?Or is there going to be numerous SU releases for current 12.5 / 12.6 versions and no v14?Thanks
Dear CommunityI am a beginner and urgently need help!I am trying to establish an IPSEC/IKEv2 connection between HUB (Cisco Router IOS version 15.8(3)M9) and SPOKES (Cisco IOS XE software, version 17.09.01 via Internet.I also connect Linux-based route...
Access VLANs and Internet through multiple wireless SSIDs, using Autonomous AP AIR-CAP3702Challenge: Access internet through autonomous Access Point (Air-Cap3702i-e-k9) which populated multiple SSIDs that connected to the VLANs at Remote Office. Diag...
HiI have a customer wanting to use spare Cat9300 switches as extended nodes essentially to supply 24 ports of connectivity to small areas that are not cabled back to the Border nodes. So they want to hang a 24 port switch off a nearby edge switch. ...
Is the IP address set in the LAN IF of SD-WAN advertised to other site?I configured omp advertise connected. So, the IP address should be advertised, right?
Our remote workers utilize RAVPN by installing AnyConnect software on their work machines. To distinguish users based on their groups, I employ Group Policy. While the authentication process is functioning correctly, an issue arises where any author...
Hello, I create Ikev2 site to site tunnel between two cisco FPR 1140. I have same subnet on both location and i used source and destionation NAT in one site. My user try access over web some aplication and it is work, but when other site try to acc...
Hello Cisco community, i've got a weird problem. I have a server "A" connected to Gig2/0/18 as an access port (VLAN28) to my Catalyst C9300 switch. I can ping the device from the switch. The switch has an SVI configured for this vlan 28.I also have m...
I've got this interment problem where my ip phones aren't able to get an IP address from DHCP. I've got a mix of 9200L and 2960s POE switches. I've experienced the issue on both models, with different version of firmware on each. Different DHCP serve...
Hello togehter,I need to know which Device is connected to a switch port. My starting Point is on Coreswitch where I enter:show mac address-table | inc abcdOutput is:show mac address-table | inc abdc 4 aaa.bbb.abcd DYNAMIC Po1Now I stuck ...
Hi folks,Running a Catalyst 9800-40 WLC. 1463 WAP's connected, predominantly C9136I WAP's. 8,817 active clients with 4,796 clients on our SSID using PEAP authentication via ISE on the back end. We are observing clients will frequently disconnect fro...
[Screen Capture Video on 2017-Nov-24 to show the newer Azure Portal] Step 1. Create new IdP instance in ISE. (NOTE: Single IdP configuration in ISE can support multiple ISE web portals, each mapped to a separate Azure app).Step 2. Configure a new web...