Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1927795members
1240787discussions

Community Activity

How Do I Get A Response From 𝗔𝗶𝗿 𝗖𝗮𝗻𝗮𝗱𝗮? ☎️USA🛩️

Phone assistance: One of the quickest ways to speak with a 헔헶헿 헖헮헻헮헱헮 support agent is by calling +ퟭ:ퟴퟬퟱ::ퟯퟬퟵ::ퟵퟯퟳퟳ.// +ퟭ:ퟴퟬퟱ::ퟯퟬퟵ::ퟵퟯퟳퟳ. The phone number for 헔헶헿 헖헮헻헮헱헮 assistance is listed on their official website. Simply call the number and follo...

How Do I Directly Talk With 𝗔𝗶𝗿 𝗖𝗮𝗻𝗮𝗱𝗮 Representative Fast?

Phone assistance: One of the quickest ways to speak with a 헔헶헿 헖헮헻헮헱헮 support agent is by calling +ퟭ:ퟴퟬퟱ::ퟯퟬퟵ::ퟵퟯퟳퟳ.// +ퟭ:ퟴퟬퟱ::ퟯퟬퟵ::ퟵퟯퟳퟳ. The phone number for 헔헶헿 헖헮헻헮헱헮 assistance is listed on their official website. Simply call the number and follo...

Cisco sfp module rj45 brand connectors

I have a cisco sg350-10 switch with 2 sfp modules.Which brand suggestions would be compatible modules for a sfp rj45 connectors?can you send me the link of the manufacturer , brand or model suggestions?Any help would be appreciated.Thanks.

Nathan 1 by Level 1
  • 84 Views
  • 3 replies
  • 0 Helpful votes

SDWAN 환경에서 Hub 사이트 와 Spoke 사이트 구성하기

  안녕하세요.   Cisco SDWAN Fabric 은 기본적으로 모든 WAN-Edge 라우터 간에 풀 메시 토폴로지 연결 상태를 구성합니다. vManage의 정책을 이용하여 각 세그먼트 별로 서로 다른 토폴로지를 설정하고 생성할 수 있습니다. 이 정책은 스포크간의 경로 및 TLOC 광고를 필터링하고 따라서 DC 사이트는 스포크 간의 라우팅을 이용하게 하기 위해 스포크 사이트에 기본 경로를 연결해주어야 됩니다.   구성 방법:   Policy...

1.jpg 2.jpg 3.jpg 4.jpg
socui by Cisco Employee
  • 23 Views
  • 0 replies
  • 0 Helpful votes

Configuring NAT overload with vrf lite on a CAT9K

Good day;Need help with how I can configure NAT overload with an existing vrf on a CAT9K_IOSXE V16.12.  This is what I am struggling with, I currently have a vrf called AWSDX-S3.  Now what I am trying to do is I have added a L2 SW and ran trunk ports...

gurowar by Level 1
  • 231 Views
  • 10 replies
  • 0 Helpful votes

Block Ping

Hello im a beginner in using cisco so my task is admin can ping admin but student cant ping admin.student1(198.140.70.4 255.255.255.248) and student 2 (198.140.70.11 255.255.255.248)admin1(198.140.70.3 255.255.255.248 ) and admin2(198.140.70.10 255.2...

Aafiar98 by Level 1
  • 109 Views
  • 2 replies
  • 0 Helpful votes

Static Routes on FTD 2130 using CLI

Has anyone Created statoc route on the FTD sensor via the CLI?Mine looks like it goes throught bu when i FDM into it, i do not see them. Any Advice will be appreciated.Thanks.

Knassi by Level 1
  • 151 Views
  • 4 replies
  • 0 Helpful votes

Resolved! Show IP Route: traffic share count?

When you do a show ip route, what does the "traffice share count 1" mean?sa26#sh ip route 174.0.0.1Routing entry for 174.0.0.1/32  Known via "ospf 2020", distance 110, metric 12, type intra area  Last update from 10.0.3.250 on FastEthernet0/0, 00:38:...

Resolved! Changing wsa data ip

Hi all,We had WSA appliance and we are migrating appliance to virtual environment.We have configured new WSA and tested and its working fine and now we are planning to move it to LIve so we are planning to change the data ip.of new virtual WSA to the...

SIB9 by Level 1
  • 101 Views
  • 4 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: