11-17-2003 12:43 PM - edited 03-02-2019 11:46 AM
My Cisco 2610 router has a ADSL-Wic card with IOS version c2600-j1s3-mz.123-1
It is a standard ios configuration, no access-list, no special configuration besides the ADSL service trying to implement.
I have read the cisco pdf files for adslwic configurations. But am I little confused on what settings and ios configs are needed.
Details:
RFC 1483 Routed - Network Service
Static IP: 80.xx.xx.205 255.255.255.128 gateway- 80.xx.xx.128
VPI 8/VCI 32
Acatel A3 DSLAM
What exact configuration is needed to config on the ISO for the WIC to run ADSL?
Thanks in advance,
juan
Solved! Go to Solution.
11-19-2003 03:22 AM
Hi
this is the default configuration for a cisco 827 with Telefonica ADSL. The configuration for a cisco 2610 is similar. I have a cisco 2610 with this configuration and it is work.
Configuración del Cisco 827 con ADSL de telefónica
no service pad
service password-encryption
!
hostname (nombre del router)
!
enable secret (password del enable)
!
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
!
!
!
!
!
interface Ethernet0
ip address (IP de la red) (mascara de la red)
ip nat inside
no ip mroute-cache
no cdp enable
interface ATM0
no ip address
no ip route-cache
no ip mroute-cache
no atm auto-configuration
no atm ilmi-keepalive
no atm address-registration
no atm ilmi-enable
bundle-enable
dsl operating-mode auto
hold-queue 208 in
!
interface ATM0.1 point-to-point
ip address (ip que te da el proveedor) (mascara)
ip nat outside
no ip route-cache
no ip mroute-cache
pvc 8/32
encapsulation aal5snap
!
!
ip nat inside source list 101 interface ATM0.1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0.1
no ip http server
access-list 101 permit ip any any
!
line con 0
transport input none
stopbits 1
line vty 0 4
password 7 (Password para el telnet)
login
!
Saludos
11-17-2003 01:43 PM
Hello,
check out this sample config:
Current configuration:
!
version 12.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname R1
!
ip subnet-zero
!
interface FastEthernet0
ip address 10.0.0.1 255.0.0.0
no ip directed-broadcast
no ip mroute-cache
!
interface ATM0
ip address 80.x.x.205 255.255.255.255
no ip directed-broadcast
no ip mroute-cache
no atm ilmi-keepalive
pvc 8/32
protocol ip 80.x.x.128
encapsulation aal5snap
!
bundle-enable
hold-queue 224 in
!
ip classless
ip route 0.0.0.0 0.0.0.0 80.x.x.128
no ip http server
!
!
end
Regards,
Georg
11-17-2003 03:32 PM
Thanks georg for your input on this.
Here is my config inputed:
Current configuration : 949 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 2610
!
enable secret xxxxxxx
enable password xxxxx
!
ip subnet-zero
!
no ip domain lookup
!
no mpls ldp logging neighbor-changes
!
no voice hpi capture buffer
no voice hpi capture destination
!
interface ATM0/0
ip address 80.x.x.205 255.255.255.128
no ip mroute-cache
no atm ilmi-keepalive
pvc telefonica 8/32
protocol ip 80.33.161.128
encapsulation aal5snap
!
dsl operating-mode auto
!
interface Ethernet0/0
ip address 192.168.0.1 255.255.255.0
no ip mroute-cache
half-duplex
!
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 80.x.x.128
!
no snmp-server enable traps tty
snmp-server enable traps stun
snmp-server enable traps bstun
!
end
This my config as it looks. Still no access.
Ping to 80.x.x.205 failed
Ping to 80.x.x.128 failed
I used debug atm event with this config, and this is what I received.
I dont know how to read this, but it looks good. But I am not able to have the internet connection working.
Where is the fault in the config?
*Mar 1 00:42:43.778: DSL(ATM0/0): 5: Modem state = 0x10
*Mar 1 00:42:45.625: DSL(ATM0/0): Received response: 0x24
*Mar 1 00:42:45.625: DSL(ATM0/0): Showtime!
*Mar 1 00:42:45.625: DSL(ATM0/0): Sent command 0x11
*Mar 1 00:42:45.629: DSL(ATM0/0): Received response: 0x61
*Mar 1 00:42:45.629: DSL(ATM0/0): Read firmware revision 0x1A04
*Mar 1 00:42:45.629: DSL(ATM0/0): Sent command 0x31
*Mar 1 00:42:45.637: DSL(ATM0/0): Received response: 0x12
*Mar 1 00:42:45.637: DSL(ATM0/0): operation mode 0x0002
*Mar 1 00:42:45.637: DSL(ATM0/0): Sent command 0x33
*Mar 1 00:42:45.641: DSL(ATM0/0): Received response: 0x16
*Mar 1 00:42:45.641: DSL(ATM0/0): Far End ITU Country Code 0x0F
*Mar 1 00:42:45.641: DSL(ATM0/0): Far End ITU Vendor ID ALCB
*Mar 1 00:42:45.641: DSL(ATM0/0): Far End ITU Vendor ID Specific 0x0000
*Mar 1 00:42:45.641: DSL(ATM0/0): Far End ITU Vendor STD Number 0x0001
*Mar 1 00:42:45.641: DSL(ATM0/0): Sent command 0x32
*Mar 1 00:42:45.645: DSL(ATM0/0): Received response: 0x14
*Mar 1 00:42:45.645: DSL(ATM0/0): Near End ITU Country Code 0x00
*Mar 1 00:42:45.645: DSL(ATM0/0): Near End ITU Vendor ID ALCB
*Mar 1 00:42:45.645: DSL(ATM0/0): Near End ITU Vendor ID Specific 0x0000
*Mar 1 00:42:45.645: DSL(ATM0/0): Near End ITU Vendor STD Number 0x0001
*Mar 1 00:42:45.649: ATM0/0 dslsar_MatchSARTxToLineSpeed(): usbw 128, clkPerCell 117029 prev_clkPerCell 117029
*Mar 1 00:42:45.649: ATM0/0 dslsar_update_us_bandwidth(): upstream bw =128 Kbps
*Mar 1 00:42:50.938: (ATM0/0) dslsar_periodic: ENABLING DSLSAR
*Mar 1 00:42:50.950: dslsar enable ATM0/0
*Mar 1 00:42:50.950: dslsar_1a_setup_vc(ATM0/0): vc:1 vpi:8 vci:32 state 2
*Mar 1 00:42:50.950: ATM0/0 dslsar_vc_setup: vcd 1, vpi 8, vci 32, avgrate 0
*Mar 1 00:42:50.954: CONFIGURING(ATM0/0) VC 1 (8/32) IN TX SCHEDULE TABLE SET 1
*Mar 1 00:42:50.954: (ATM0/0)Forcing Peakrate and Avgrate to: 128
*Mar 1 00:42:50.954: (ATM0/0)Requested QoS: Peakrate = 128, Avgrate = 128, Burstsize =0
*Mar 1 00:42:50.954: (ATM0/0)Configuring VC 1: slot 0 in TST 5
*Mar 1 00:42:50.954: (ATM0/0) SUCCESSFUL CONFIGURATION OF VC 1 (8/32), QOS Type 4
*Mar 1 00:42:50.994: dslsar_setup_cos(ATM0/0): vc:1 wred_name:- max_q:0
*Mar 1 00:42:50.994: %ATM-5-UPDOWN: Interface ATM0/0, Changing autovc 8/32 to PVC activated.
*Mar 1 00:42:50.994: CONFIGURING(ATM0/0) VC 1 (8/32) IN TX SCHEDULE TABLE SET 0
*Mar 1 00:42:50.994: (ATM0/0)Forcing Peakrate and Avgrate to: 128
*Mar 1 00:42:50.998: (ATM0/0)Requested QoS: Peakrate = 128, Avgrate = 128, Burstsize =0
*Mar 1 00:42:50.998: (ATM0/0)Configuring VC 1: slot 0 in TST 5
*Mar 1 00:42:50.998: (ATM0/0) SUCCESSFUL CONFIGURATION OF VC 1 (8/32), QOS Type 4ATM0/0 last_address 0x12000
*Mar 1 00:42:52.857: %LINK-3-UPDOWN: Interface ATM0/0, changed state to up
*Mar 1 00:42:52.857: dslsar_atm_lineaction(ATM0/0): state=4
*Mar 1 00:42:52.857: dslsar_atm_lineaction: REG_INVOKE: line up
*Mar 1 00:42:53.859: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0/0, changed state to up
11-18-2003 12:23 AM
Hello,
you might want to check with your provider if the default gateway is correct, 81.x.x.128/25 is the subnet address, hosts are from 81.x.x.129 thru 81.x.x.254, usually the default gateway comes from this range.
Regards,
GP
11-18-2003 01:52 PM
Hi, no need to configure the default gateway, just put an "ip route 0.0.0.0 0.0.0.0 atm 0" or use my config !!!
I also use it with Telefonica,
interface Loopback100
description **Internet Public IP Address**
ip address 80.X.X.X 255.255.255.255
!
interface ATM0
mtu 1500
bandwidth 256
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
no fair-queue
!
interface ATM0.1 point-to-point
mtu 1500
bandwidth 256
ip unnumbered Loopback100
pvc 8/32
¡
ip route 0.0.0.0 0.0.0.0 ATM0.1
11-19-2003 03:22 AM
Hi
this is the default configuration for a cisco 827 with Telefonica ADSL. The configuration for a cisco 2610 is similar. I have a cisco 2610 with this configuration and it is work.
Configuración del Cisco 827 con ADSL de telefónica
no service pad
service password-encryption
!
hostname (nombre del router)
!
enable secret (password del enable)
!
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
!
!
!
!
!
interface Ethernet0
ip address (IP de la red) (mascara de la red)
ip nat inside
no ip mroute-cache
no cdp enable
interface ATM0
no ip address
no ip route-cache
no ip mroute-cache
no atm auto-configuration
no atm ilmi-keepalive
no atm address-registration
no atm ilmi-enable
bundle-enable
dsl operating-mode auto
hold-queue 208 in
!
interface ATM0.1 point-to-point
ip address (ip que te da el proveedor) (mascara)
ip nat outside
no ip route-cache
no ip mroute-cache
pvc 8/32
encapsulation aal5snap
!
!
ip nat inside source list 101 interface ATM0.1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0.1
no ip http server
access-list 101 permit ip any any
!
line con 0
transport input none
stopbits 1
line vty 0 4
password 7 (Password para el telnet)
login
!
Saludos
11-19-2003 07:14 AM
Mr. Garcia,
Gracias por el ISO.
Everthing is woring now.
So what else can we do with Telefonica ADSL? Voice, etc....
My email: sabadell03@telefonica.net
It is unbelievable how useless Telefonica is with their service and support.
Many thanks to all in Cisco Forums.
Juan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide