Hi All, I see an issue in Cisco subscribing to external resource,Here's the issue and the sets1. BLF SD created as 111130012. Create Trunk "ExternalTrunk" with destination sipp server(192.68.1.1)3. Route plan 1111XXXX is created and "ExternalTrun...
Hi All, I see an issue in Cisco subscribing to external resource,Here's the issue and the sets1. BLF SD created as 111130012. Create Trunk "ExternalTrunk" with destination sipp server(192.68.1.1)3. Route plan 1111XXXX is created and "ExternalTrun...
hi there,i want to monitor that when a call comes to Hunt pilot, he hunts for any idle available hunt list extension , if there is no extension available ,the call is put on hold to wait ,i want to track that call, for statistics that for how much ti...
Hello, I'm working on integrating our server side video to the jabber client. The goal is to see only video for now in my Iphone(I have jabber client connected to the sandbox) from rtp server stream.To simulate what we are doing on the server side I ...
Hi,I am trying to setup encrypted SRTP via SIP Trunk.I have already configured the following:1) SIP Security Profile to use "Encrypted TLS" and enable "transmit security status"2) SIP Trunk to enable "Allow SRTP with TLS"3) SIP Profile to enable "ear...
How many CTI ports are required when for the makecall function and monitoring a station? is the CTI port persistent connection for each monitoring device?
I've attached a trace document of a JTAPI event in which the DeviceUID name has been truncated. It is not displaying the whole name. Is there a max character length?
Hi all,our application is using TLS for JTAPI. During startup of the application JTAPI is initialized and the client and server certificates are downloaded. During the next start of the application the certificates are downloaded again. is it possibl...
The third party devices (legacy paging devices) are registered in CUCM. While using JTAPI to request all the address in this provide's domain, the third party devices are not visible. Did Cisco JTAPI can see these third party devices as end-point add...
Call flow is a simple manual conference:Inbound call from external party 3155211 to 60196019 answers6019 initiates conference to 60186018 answersRace condition: 6019 completes conference while at the same time 3155211 releasesResult: 3155211 is gone ...
Hi, our customer needs to control phones that are registered on SRST gateway. It's look that it is working if i configured gateway as CME in SRST mode. But only for Skinny phones.I found document http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cu...
Does anyone has the instruction on how to encrypt the user/password?
Hello,I'm working as a consultant on a project where we use the UDS API.I'm working with C# .NET and visual studio.I have downloaded the xml schemas found here:https://developer.cisco.com/site/collaboration/management/user-data-services/develop-and-t...
We have a customer that is attempting to reduce jtapi logging in high call flow environment. If they need to reduce JTAPI log volumes, what is the minimum output values required for debugging, and which ones can be safely turned off?Thank you.
Hello,I'm trying to play around with the UDS API, but I'm always getting "No Response Was Received. Either the request could not be opened or the request timed out."I'm using a users web service:https://cucm1.dcloud.cisco.com:8443/cucm-uds/users?fir...
Hi, i have a big issue whit a call transfer over sip trunk. When im doing a call from the CME to a phone on the PBX, and transfer that call back to another phone on the cisco, the call is still routed through the PBX as shown in the picture. The prob...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-03-2024 06:31 AM | ||
11-30-2023 06:11 PM | ||
08-23-2023 10:35 AM | ||
08-09-2023 04:50 PM | ||
05-23-2023 02:08 PM |