Hello: Can someone from Cisco TAC publish the workaround for this in the bug search tool notes, or here in the forum?
Forum Posts
Hello, I'm wondering if anyone can comment on a workaround for this bug. It certainly doesn't affect all users on the affected releases so it would seem there has to be something that causes it to happen. We are on 11.5.2 and have yet to approve mo...
My problem is here too!!
Hi Guys, We have some Cisco 9500 switches in our network running version 16.6.5 and I'm still getting the error message. Not sure if anyone else is having the same problem. When you do the work around, something else times out. You work around ...
This issue is seen in CUCA version 11.5.1.11900-26. The workaround to use a URL ( https://) i.e. without 8443 while uploading voicename/greetings worked just fine. This work around also solved issues when trying to use the recording applet to dial a ...
We have the same problem on two different 8845 phones, there is a steeady constant ticking or clicking noise coming through the handset. rerplacing the handset does not resolve the problem. Both phones were purchased at the same time back in 2016.
Above this bug, Cisco hasn't released fixed version. is it correct?
Hello, we will have problems with the latest Cisco Jabber on Android S8 Smartphones. The Jabber login and logout again the whole time. Reinstallation of the jabber did not fix the issue. The smartphone has the latest Android update and the Cisco Jabb...
I'm seeing this behaviour, but workaround does not work on all switches. (a few have been fine, but mostly i get no forwarded packets)Removing the monitor session and recreating it does not work. Still no packets are forwarded.example:All RSPAN vlans...
i have same problem with WS-C2960G-48TC-L run 150.0(2)SE11 ios. when i running show command the switch silent reload.
Connec to a Cisco 1800 sensor via SSH
Some additional information:The workaround**ASA(config)# http server basic-auth Java**can not be configured before updating the ASA to a affected firmware release. The workaround is only a possibility to fix the issue via ssh and get the ASA reconnec...
Hi guys, I struggled several days with upgrade of the DNA appliance from 1.1 to 1.1.2, but in the end I found a working workaround for this bug. From the CLI I could see the system was failing upgrading: $ maglev package status maglev-1 [main -...
Not sure why an issue that affects all my users, and I'm assuming all other users on same version is only listed as Moderate. This should be a top priority. I first reported this nearly a month ago.
I believe I am hitting this bug on 8.5.135.0 with my 3802i APs. Most of the APs are only getting one or two of the flexconnect ACLs. I tried removing the ACL from flexconnect group and re added it which still did not help.
